1 inch Bronze Solid Bar, 12 inch Length, BAR-BRONZE-1

Solid round bronze bar in 7 imperial diameters, 1/2 to 2 inch. Each piece is 12 inch long (about 30 cm).

Solid bar is bought to machine into bushes, bearings, sleeves, wear rings and similar parts.

Where this product is used

• Machining bushes, bearings and sleeves
• Wear rings, spacers and thrust washers
• Replacement parts for worn bronze components
• Workshop stock for repairs and one-off parts

Features

• Solid round bronze bar, 12 inch lengths
• 7 imperial diameters, 1/2 to 2 inch
• Diameter listed for every part number
• Bronze machines well, has low friction and resists corrosion
• Cut and machine to the length and finish you need

Key specifications

Sizes available

Selecting and fitting

Choose the bar from the largest finished diameter, and allow extra material for turning. If you need a bore through the part, hollow bar saves machining time: see Bronze Hollow Bar, Imperial, 1-1/2 to 2-1/2 inch OD, 12 inch Lengths.

Further solid bar sizes are listed in the manufacturer catalogue. Ask AIMS if you need a size that is not shown.

Cut the bar to length oversize and leave a machining allowance on the diameters you need to finish.

Dimensions are as listed in the manufacturer catalogue and are for reference. Contact AIMS to confirm a measurement if it is critical to your application.