CorrosionX Rust Reconverter LT 1L
Available
CorrosionX Rust Reconverter LT is a water-based rust converter and long-term protective coating. When applied, it chemically converts rust into a black organic complex. As it dries, a clear acrylic coating separates out to coat and protect the metal surface.
The coating can be left as is or painted over with latex, oil-based or epoxy paint. Loose rust flakes must be wire-brushed off before it goes on. The product is acidic and is classed as an eye irritant, so check the safety information before use.
Where this product is used
- Rusted ferrous metal surfaces that can be painted
- Machinery, heavy equipment, tools and metal buildings
- Automobiles, boats and railroads (the, is formulated for these)
- Industrial plants, schools, institutions, office buildings, homes, farms and shipyards
Features
- Water-based liquid with no flash point (non-flammable)
- Chemically converts rust into a black organic complex
- Dries to a clear, hard acrylic finish
- Can be painted over with latex, oil-based or epoxy paint, or left unpainted after drying
- Applied by brush, swab, dip or spray, including latex paint spray equipment
- Application rate of 300 to 500 sq ft per US gallon (about 7.4 to 12.3 m² per litre)
Key specifications
| Specification | Detail |
|---|---|
| Brand | CorrosionX |
| Product type | Rust converter and long-term protective coating |
| Form | Water-based liquid, semi-viscous liquid |
| Contains (per TDS) | Water, aqueous polystyrene/acrylic emulsion polymer, tannic acid, 2-butoxyethanol |
| Reaction product | Black organic complex under a clear acrylic coating |
| pH | Below 2 per SDS (1.0 per TDS), acidic |
| Specific gravity | 1.025 at 15.6 °C, 1.04 (TDS) |
| Flash point | None, non-flammable |
| Non-volatile by volume | 38%, VOC 20g/L (2%) |
| Application rate | 300 to 500 sq ft per US gallon (about 7.4 to 12.3 m² per litre) |
| Application methods | Brush, dip, swab or spray, may be sprayed with equipment designed for latex paint |
| Cold stability / freezing | Cold stability 35 °F (about 1.7 °C), do not store at 32 °F (0 °C) or below, do not allow to freeze |
| Storage stability | 1 year or more (TDS) |
| Pack sizes | 32 fl oz (about 946 ml), 1 US gallon, 5 US gallon |
Using it
Shake well. Clean loose rust flakes from the surface with a wire brush, then apply evenly at 300 to 500 sq ft per US gallon by brushing, dipping, swabbing or spraying.
It may be applied with equipment designed to spray latex paint. If necessary, add up to 3 oz (about 89 ml) of water per US gallon when spraying. Allow it to dry completely; a clear hard finish forms.
The surface may be painted or left as is after drying. Outdoors or in high humidity it should be painted over with an oil-based enamel or epoxy paint.
No dry-time or recoat-time figures, only to allow the product to dry completely.
Storage and handling
Store in a cool, dry, well-ventilated place in the original container, with the container closed when not in use. Do not allow the product to freeze, do not store it at 32 °F (0 °C) or below, and avoid temperature extremes. It has a storage stability of 1 year or more.
Limits and safety
Acidic (pH below 2). The Australian SDS classes it as Eye Irritation Category 2 with the signal word WARNING; the product may be absorbed through the skin in harmful amounts (it contains 2-butoxyethanol) and may darken the skin. Do not store or dispense it into metal containers, especially aluminium. Avoid strong oxidising agents and alkalis. The SDS calls for ventilation, safety glasses with side-shields and impermeable gloves such as neoprene or nitrile rubber. It has no service temperature and no approvals for this product.
Choosing the right option
For a rust treatment from another range see Loctite 75430 Extend Rust Treatment 946ml. For corrosion protection on metal that is not rusted, see CorrosionX Corrosion Inhibitor, Moisture Displacer & Lubricant.
See also: Loctite 75430 Extend Rust Treatment 946ml, CorrosionX Corrosion Inhibitor, Moisture Displacer & Lubricant, CorrosionX HD Corrosion Inhibitor, Moisture Displacer & Lubricant, CorrosionX XD Corrosion Inhibitor & Lubricant.
Couldn't load pickup availability
Secure Checkout. We do not store credit card details
CorrosionX Rust Reconverter LT 1L
SKU: A0182915 | Model: 75642-RUSTCONV
CorrosionX A0182915: corrosionX Rust Reconverter LT water-based rust converter. Type: Water-based rust converter and protective coating. Application rate: 300 to 500 sq ft per US gallon (about 7.4 to 12.3 m² per litre). Application: Brush, dip, swab or spray.

