CRC Electrical Parts Cleaner Quick Drying 400g

CRC Electrical Parts Cleaner is a flammable cleaner and degreaser containing no trichloroethylene, supplied in a 400g aerosol. It evaporates fast, leaves no residue and removes the need for rinsing or wiping.

It suits removing grease, oil, corrosion and sludge from air tools, mechanical brakes, clutches, chains, motors, dies, bearings, generators and compressors. Do not use it on energised equipment or on sensitive electronics.

Where this product is used

• Removing grease, oil, corrosion and sludge
• Air tools, mechanical brakes, clutches, chains and wire ropes
• Motors, dies, moulds, parts and bearings
• Generators and compressors

Features

• Fast evaporation, which minimises downtime on clean-in-place cleaning
• Residue free: it prevents harmful build-up and removes the need for rinsing or wiping
• Contains no trichloroethylene
• 360 degree valve expels all usable product evenly when the can is held upside down
• Extension tube for hard-to-reach areas
• Not for use on energised equipment, sensitive electronics or acrylic, ABS and polycarbonate plastics

Key specifications

Choosing the right option

This is a flammable cleaner for mechanical parts. For a non-flammable cleaner for electric motors see CRC Aerosol Lectra Clean Electric Motor & Equipment Cleaner 400g. Sensitive electronics need a precision cleaner, not this product.

See also: CRC Nail Gun Cleaner and Degreaser 400g, CRC Heavy Duty Parts Cleaner 400g, CRC Aeroclean Degreaser 400g, CRC Hot Shot Degreaser 500g.

Using it

Read the entire label. Do not use on energised equipment. Remove plates or covers to expose the interior and scrape off heavy deposits first.

Spray liberally and allow the product to run off; use the extension tube for hard-to-reach areas. A dry absorbent cloth accelerates drying. Insufficient ventilation or drying time can result in fire or explosion.

Test on a small area first, as the product may be harmful to some plastics.

Flash point below 23 °C for the aerosol.

Flash point 10 °C for the concentrate without propellant.

Remove plates or covers, scrape heavy deposits, then spray liberally and allow it to run off, using the extension tube where needed.

Storage and handling

Do not puncture, incinerate or store above 50 °C.

Limits and safety

Hazard classification: Danger. Extremely flammable aerosol (H222), pressurised container that may burst if heated (H229), may be harmful if swallowed, in contact with skin or if inhaled (H303, H313, H333), causes mild skin irritation (H316), causes serious eye irritation (H319), may cause drowsiness or dizziness (H336), repeated exposure may cause skin dryness or cracking (AUH066). Flash point below 23 °C; UN 1950, Class 2.1; classified as Schedule 5 (S5) under the SUSMP poisons standard. Not for use on energised equipment, sensitive electronics, computers, tape decks or VCRs, or on plastics such as acrylic, ABS and polycarbonate. Read the safety data sheet before use.