CRC Mass Air Flow Sensor Cleaner Aerosol 300g
Available
CRC Mass Air Flow Sensor Cleaner is an aerosol and a safe, effective way to clean delicate MAF sensors in modern vehicles. A contaminated sensor is likely to cause poor fuel economy, excessive emission, power loss, hard starting, stalling and even gear problems.
The MAF sensor sits between the air filter and the throttle body and is cleaned with a few sprays through the extension tube. Use it every time the air filter is serviced.
Where this product is used
- Cleaning delicate MAF sensors in modern vehicles
- Cleaning the MAF sensor each time the air filter is serviced
Features
- It will not damage MAF sensors or housing, unlike other chemicals
- It is plastic safe and residue free, evaporating in seconds
- Extension tube for reaching the sensor
- Carbon dioxide propellant
Key specifications
| Specification | Detail |
|---|---|
| Brand | CRC |
| CRC product number | 5014 |
| Type | Aerosol mass air flow (MAF) sensor cleaner |
| Main ingredients | Hydrocarbons C5-6 rich (less than 0.1% benzene) more than 60%, carbon dioxide 5 to 10%, n-hexane below 2% |
| Appearance | Clear colourless liquid, aerosol dispensed |
| Odour | Alcohol |
| Relative density | 0.6699 |
| Flash point | -17 °C |
| Boiling point | 60 °C |
| Propellant | Carbon dioxide |
| Solubility | Insoluble in water |
| Dangerous goods | UN 1950, AEROSOLS, Class 2.1 |
| Pack | 300g aerosol |
| Warranty | Conditional warranty of 5 years from the date of manufacture |
Choosing the right option
Use this cleaner with CRC Throttle Body and Air Intake Cleaner each time the air filter is serviced; see CRC Throttle Body & Air Intake Cleaner 400g. For intake valves see CRC GDI IVD™ Intake Valve & Turbo Cleaner Aerosol 312g.
See also: CRC Throttle Body & Air Intake Cleaner 400g, CRC GDI IVD™ Intake Valve & Turbo Cleaner Aerosol 312g.
Using it
Turn off the vehicle. Do not apply while equipment is energised. Locate the MAF sensor between the air filter and the throttle body, unplug the MAF sensor wire harness, remove the MAF housing and place a cloth underneath.
With the extension tube attached, apply 10-15 sprays onto the hot wires or flat film element. Spray all sides of the sensor and clean all wires and connectors.
Reassemble the MAF housing and allow it to dry thoroughly before reactivating.
Aggressive products such as brake and carburettor cleaners can cause serious damage to sensitive MAF sensor parts.
Use a cleaner made for the job.
Storage and handling
Do not puncture, incinerate or store above 50 °C. Keep away from live electrical sources, as aerosol cans conduct electricity.
Limits and safety
DANGER. Extremely flammable aerosol; pressurised container that may burst if heated. May cause drowsiness or dizziness. UN 1950, Class 2.1. Flash point -17 °C. Do not apply while equipment is energised. Read the safety data sheet before use.
Couldn't load pickup availability
Secure Checkout. We do not store credit card details
