CRC Syntha-Tech Lubricant With PTFE 312g

CRC Syntha-Tech is a synthetic lubricant with a PTFE additive, anti-wear additives and extreme pressure additives, supplied as a 312g aerosol. It is NSF H1 registered for incidental food contact, and NSF registered for use in meat and poultry facilities.

Effective temperature range -40 °C to +230 °C, with test data including a Falex load of 1,000 lbs and a four ball wear scar of 0.39mm. It suits bearings, gears, chains, conveyors and food processing equipment among its uses.

Where this product is used

• Bearings, gears, linkages, motors and chains
• Cables, rollers, guide bars, pulleys, cams and valves
• Ball joints, hinges, slides, pistons, doors and fans
• Cutting tools, taps and dies
• Handling equipment, conveyors, hoists and lifts
• Food processing equipment

Features

• Synthetic lubricant with PTFE, anti-wear and extreme pressure additives
• NSF H1 registered for incidental food contact
• NSF registered for use in meat and poultry facilities
• Effective from -40 °C to +230 °C
• ASTM D-4172 four ball wear scar 0.39mm and coefficient of friction 0.07
• ASTM D-3233 Falex load test 1,000 lbs
• VOC content 0g/L

Key specifications

Choosing the right option

For a plain food grade machine oil see CRC Food Grade Machine Oil 312g. For a dry film lubricant see CRC Dry Moly Lube 3084 - 312g, which is not food grade.

See also: CRC Food Grade Machine Oil 312g, CRC Aerosol Chain Lube Food Grade 340g, CRC Non Silicone Food Grade Penetrating Oil 312g, CRC Aerosol Power Lube With PTFE High Performance Lubricant 300g.

Using it

Do not apply while equipment is energised.

Shake well. Spray an even coat so the product coats all moving parts. Reapply after the first coat has penetrated, and repeat as necessary.

It is safe on most plastics, and to test a small area first.

Storage and handling

It has a conditional warranty of 5 years from date of manufacture. Keep the can away from heat and do not expose it to temperatures above 50 °C.

Limits and safety

Hazard classification: signal word Warning. Pressurised container: may burst if heated (H229). The SDS flammability line reads combustible, and the aerosol is transport class UN 1950, Aerosols, Class 2.2. The 70 °C flash point is for the liquid component. Keep away from heat and ignition sources. Do not apply while equipment is energised. If used as an anti-rust film, NSF requires the compound to be removed by washing or wiping. Read the safety data sheet before use.