Mitutoyo 7002-10 Dial Gauge Stand, Flat Anvil
Out of stock
The Mitutoyo Series 7 dial gauge stand holds a dial indicator or Digimatic indicator over a flat anvil, so you can compare the size of parts. Toolrooms, quality control teams and inspectors use it for comparison measurements of size. Vertical fine adjustment is available with one-touch control, thanks to the parallel spring suspension.
An anvil is supplied as standard. The two options differ only by the anvil. Choose the anvil face you want: serrated (7001-10) or flat (7002-10). A dial indicator is not included with the stand. Compact dial indicators with a bezel of 31mm or 36mm are not suitable for these stands.
Where this product is used
- Comparison measurement of part size against a master
- Toolroom and quality control checks with a dial indicator or Digimatic indicator
- Holding an indicator at a set height over a reference anvil
Features
- One-touch vertical fine adjustment on a parallel spring suspension
- Standard anvil of 58mm, serrated (7001-10) or flat (7002-10)
- Clamping range on the column of 0 to 95mm
- Stem hole for 8mm and 0.375" stems
- Anvil flat to 1.3 µm or better
- Perpendicularity of the stem hole to the anvil is better than 0.4/100
- Optional 90mm square anvil and domed anvil are available
Key specifications
| Specification | Detail |
|---|---|
| Brand | Mitutoyo |
| Series | 7 dial gauge stand |
| Anvil | 58mm hardened steel, serrated (7001-10) or flat (7002-10) |
| Clamping range on column | 0 to 95mm |
| Stem hole | 8mm and 0.375" |
| Anvil flatness | 1.3 µm or better |
| Perpendicularity of stem hole to anvil | Better than 0.4/100 |
| Base | 168mm x 110mm |
| Column diameter | 30mm |
Supplied with
- One dial gauge stand with its 58mm anvil
- Not included with the stand: dial indicator
Choosing the right option
| Option | Part number | SKU |
|---|---|---|
| With serrated anvil | 7001-10 | A0211432 |
| With flat anvil | 7002-10 | A0211433 |
Resources
Couldn't load pickup availability
Secure Checkout. We do not store credit card details
Mitutoyo Dial Gauge Stand Stem Hole ∅8, ∅9.53mm (Series 7): With flat anvil
SKU: A0211433 | Model: 7002-10
With a flat anvil, the 7002-10 is a dial gauge stand. It comes with a hardened steel flat (non-serrated) anvil (101461), 58mm across and 14mm thick. The stem hole takes 8mm and 0.375" stems, and the column clamps over a range of 0 to 95mm. The anvil is flat to 1.3 µm or better.
