Dixon GVRC1161-080 3" (80 mm) Flanged OS&Y Gate Valve Cast Iron

This Dixon gate valve is a cast iron OS&Y (outside screw and yoke) gate valve with a wedge and flanged ends, sold as figure GVRC-1161. This listing covers four sizes, from 3" (80 mm) to 10" (250 mm).

The valves are listed with Table E flange drilling, and the face-to-face length for each size is in the table below. Dixon's current catalogue tables do not carry this figure number, so confirm the pressure rating, temperature and flange drilling with us for your duty before you order.

Where this product is used

• Isolation on flanged pipework where a cast iron OS&Y gate valve is specified.
• Replacement of an existing GVRC-1161 gate valve in the same size and face-to-face length.

Features

• Cast iron body with a wedge
• OS&Y (outside screw and yoke) rising stem
• Flanged ends, listed with Table E drilling
• Four sizes, 80 mm to 250 mm (3 in to 10 in)

Common specifications

Key specifications

Face-to-face lengths are from the product record for each part number.

Selecting the right option

Check the flange drilling against your pipework: these valves are listed as Table E, and Dixon's 100 mm valves in the same figure come in Table D and Table E versions (see Related products). An OS&Y valve is for on and off service, and the stem rises as the valve opens, so leave room above the valve. Ask us for the pressure and temperature rating for your size before you specify it.

Related products

Related Dixon valves: Dixon Flanged OS & Y Gate Valve Table, Dixon Ductile Iron Flanged Gate Valve and Dixon Shouldered Gate Valve Ductile Iron Body.