Dixon King Crimp Style Combination Nipple Threaded End 4" Hose ID

This Dixon STC40CS is a King Crimp style combination nipple in carbon steel for 100mm (4") hose ID, with an NPT threaded end (the BSP version is STC40CSA). It is used with Dixon King Crimp ferrules and sleeves, which are crimped permanently onto the hose. The style comes in plated carbon steel (schedule 80 and schedule 40) and in 316 stainless steel.

The nipple has two grooves; the second is the roll stamp groove, where the part number is stamped. To use crimp-style hose tails only with crimp-style sleeves and ferrules, and not to mix them with other manufacturers' products.

Where this product is used

• Permanent crimped hose assemblies in industrial and fluid transfer service where a King Crimp ferrule or sleeve is used
• Hose ends that need a 4" (100mm) NPT thread

Features

• King Crimp style combination nipple, carbon steel, NPT threaded end
• For 100mm (4") hose ID, used with King Crimp ferrules and sleeves
• Working pressure at ambient: 300 PSI with a ferrule, 175 PSI with a sleeve
• Second groove carries the stamped part number
• Do not mix with other manufacturers' crimp products

Key specifications

Choosing the right option

Confirm the thread (NPT here, BSP for STC40CSA) before you order. Dixon also offers a heavy-duty NPT version, STC40CSHD, separately.

The chart names STC40CS at 71°C and STC40CSA at 82°C; the 121°C row belongs to the same 100mm block.

Related Dixon products: Dixon 65mm Combination Nipple Table E Flanged Hosetail - Steel and Dixon Conduct-A-Boss Vapour Recovery Coupler 4" Hose ID.