FYH SB205

FYH SB205 is a set screw insert bearing with a 25mm bore. It measures 52mm O.D. by 27mm inner ring width, with a basic dynamic load rating of 14kN and a static rating of 7.85kN. It has two set screws, a spherical O.D. and a narrow inner ring. Its load ratings are in the Model Details and are the same as the UC of the same number. It belongs to the light duty SB series.

Where this product is used

• Replacement insert for a plummer block or pillow block unit
• Replacement insert for flange and take-up housings with a matching spherical bore
• Conveyor rollers, drive shafts and idler stations
• Fans, blowers and pumps
• Agricultural, construction and general industrial machinery

Features

• Set screws spaced 120° apart lock the insert to a 25mm shaft
• Spherical O.D. for housings with a matching spherical bore
• One-piece seal and slinger design, supplied pre-lubricated with FYH grease
• Basic dynamic load rating Cr 14kN and static rating C0r 7.85kN
• Allowable rotating speed 5,100rpm (standard value)

Key specifications

Fitting and use

Tighten the set screws once the insert is in position on the shaft.

The spherical O.D. seats in a housing with a matching spherical bore.

Choosing the right option

If you need another shaft size, the related pages below list the other sizes in this range.

Metric bores are in mm: match the bore to the shaft you have.

See also: SB200 insert bearings, 1/2 to 1 7/16" bore (imperial), SB200 insert bearings, 12 to 40mm bore (metric), SA200 insert bearings, 1/2 to 1 1/2" bore (imperial), SA200 insert bearings, 7/8 to 1 7/16" bore (imperial).