FYH UCX10-30

FYH UCX10-30 is a set screw insert bearing with a 1 7/8" bore (47.62mm). It measures 100mm (3.937") O.D., with a basic dynamic load rating of 43.4kN and a static rating of 29.4kN. It is a UC type insert with a wide inner ring, set screws and a spherical O.D. for a housing with a matching spherical bore, medium duty (diameter series X).

Where this product is used

• Replacement insert for a plummer block or pillow block unit
• Replacement insert for flange and take-up housings with a matching spherical bore
• Conveyor rollers, drive shafts and idler stations
• Fans, blowers and pumps
• Agricultural, construction and general industrial machinery

Features

• Set screws spaced 120° apart lock the insert to a 1 7/8" shaft
• Spherical O.D. for housings with a matching spherical bore
• Rubber seal with metal slinger, supplied pre-lubricated with FYH grease
• Basic dynamic load rating Cr 43.4kN and static rating C0r 29.4kN
• Allowable rotating speed 2,500rpm (standard value)

Key specifications

Fitting and use

Tighten the set screws once the insert is in position on the shaft.

Match the insert to a housing with the same size number: the spherical O.D. seats in a matching spherical housing bore.

Choosing the right option

If you need another shaft size, the related pages below list the other sizes in this range.

Imperial (inch) bores are in fractions of an inch; the Model Details give the size in mm with the inch size in brackets: match the bore to the shaft you have.

O.D., Cr, C0r and f0 are taken row UCX10-31 (same size number).

See also: PX series medium pillow block housings (size PX10), FX series medium four bolt flange housings (size FX10), FCX series medium round flange cartridge housings (size FCX10), UCX medium duty insert bearings, 25 to 60mm bore (metric).