FYH SA207-22 Insert Bearing, 1 3/8 in Bore, Eccentric Collar, 72 mm O.D.
Available
This page covers 4 FYH SA200 series insert bearings (SA205-14 to SA207-23) with an eccentric locking collar, bore sizes 7/8 to 1 7/16 in (imperial). Choose the size from the drop-down: each variant has its own dimensions, load ratings and mass in the Model Details.
An eccentric collar insert locks to the shaft with a collar that turns against the inner ring. It is the replaceable bearing inside a plummer block (pillow block), flange or take-up unit, and the spherical O.D. seats in a housing with a matching spherical bore.
Where this product is used
- Replacement insert for a plummer block or pillow block unit
- Replacement insert for flange and take-up housings with a matching spherical bore
- Conveyor rollers, drive shafts and idler stations
- Fans, blowers and pumps
- Agricultural, construction and general industrial machinery
Features
- Eccentric locking collar: the collar engages the inner ring profile and a set screw is tightened to prevent slipping
- Spherical O.D. for housings with a matching spherical bore
- Supplied pre-lubricated with FYH grease
- Light duty series
- Basic dynamic load rating Cr 14 to 25.7 kN and static rating C0r 7.85 to 15.4 kN (see the Model Details for each size)
Key specifications
| Specification | Detail |
|---|---|
| Type | Insert bearing (deep groove ball bearing) with eccentric locking collar and spherical O.D. |
| Models | SA205-14 to SA207-23 (4 sizes) |
| Bore diameter d | 7/8 to 1 7/16 in (imperial) |
| Outer diameter D | 52 to 72 mm |
| Inner ring width B | 21 to 23 mm |
| Outer ring width C | 15 to 17 mm |
| Locking | Eccentric locking collar with a set screw |
| Outer ring | Spherical O.D. |
| Lubrication | Supplied pre-lubricated with FYH grease |
| Duty | Light |
| Basic dynamic load rating Cr | 14 to 25.7 kN |
| Basic static load rating C0r | 7.85 to 15.4 kN |
| Allowable rotating speed (standard value) | 3,700 to 5,100 rpm |
| Brand | FYH (FYH Inc., Japan) |
Available sizes
| Model | Bore d | O.D. D (mm) | Width B (mm) | Cr (kN) | C0r (kN) | Speed (rpm) | Mass (kg) |
|---|---|---|---|---|---|---|---|
| SA205-14 | 22.22 mm (7/8 in) | 52 | 21 | 14 | 7.85 | 5,100 | 0.22 |
| SA206-18 | 28.57 mm (1 1/8 in) | 62 | 22 | 19.5 | 11.3 | 4,300 | 0.3 |
| SA207-22 | 34.92 mm (1 3/8 in) | 72 | 23 | 25.7 | 15.4 | 3,700 | 0.5 |
| SA207-23 | 36.51 mm (1 7/16 in) | 72 | 23 | 25.7 | 15.4 | 3,700 | 0.5 |
Selecting the right option
Every size on this page has an imperial (inch) bore. The drop-down shows the shaft size in inches; the Model Details give the bore in mm with the inch size in brackets. Metric shafts need the metric version of the insert.
The catalogue offers the SA series in a re-lube style (grease groove and holes on the O.D.) and a sealed-for-life style. The model numbers on this page do not carry the letter that marks the style.
Fitting and use
Check the load and speed against the catalogue figures in the Model Details before ordering, and apply a suitable safety factor. The allowable rotating speed in the catalogue is a standard value: it falls to 80% for units fitted with covers, and a loose fit between shaft and inner ring reduces it further.
Fit the collar against the inner ring so the eccentric surfaces engage, then tighten the set screw in the collar.
The spherical O.D. seats in a housing with a matching spherical bore.
Related products
Related FYH insert bearing pages: SA200 insert bearings, 12 to 40 mm bore (metric), SA200 insert bearings, 1/2 to 1 1/2 in bore (imperial), NA200 insert bearings, 20 to 60 mm bore (metric), NA200 insert bearings, 3/4 and 1 5/8 in bore (imperial), NA200 insert bearings, 1 to 2 1/4 in bore (imperial) and SB200 insert bearings, 12 to 40 mm bore (metric). Single-model pages in this range: SA202, SA202-10, SA205-15, SA206-19 and SA207-20.
Couldn't load pickup availability
Secure Checkout. We do not store credit card details
FYH SA200 Series Insert Bearings, Eccentric Collar, 7/8 to 1 7/16 in Bore (Imperial): 1 3/8
SKU: A0106740 | Model: SA207-22/FYH
FYH SA207-22 insert bearing, 1 3/8 in bore, eccentric collar, 72 mm O.D., Cr 25.7 kN. Order online from AIMS Industrial.
