Hobson BS10ZCM060012 M6 x 12mm Metric Hex Set Screw, Class 10.9, Zinc plated

The Hobson metric hex set screw has a hex head and a metric thread, and is fitted into a tapped hole or through a clearance hole with a nut (Class 10.9, zinc plated). This page lists 113 items: M6 to M36, in lengths from 12 to 200mm.

Hobson lists class 10.9 as high tensile, and its class and grade chart pairs class 10.9 with imperial grade 8 (manufacturer-stated).

The pitch shown for each size is the coarse pitch given in the Hobson thread table (manufacturer-stated).

Pack quantity is shown for each item in the table.

Where this product is used

• Fitted into a tapped hole, or through a clearance hole with a nut and washer, to clamp parts together
• Replacing a hex head screw of the same thread form, diameter, pitch and length
• Machinery, equipment and fabrication work where a hex head screw is called for

Features

• 113 items: M6 to M36
• Metric thread, pitch shown in the table
• Class 10.9, zinc plated
• Length 12 to 200mm
• Minimum tensile strength by size from the Hobson guide, shown in the table (manufacturer-stated)

Common specifications

Pitch and strength by diameter

Figures by diameter: pitch from the Hobson thread table and minimum tensile strength from the Hobson guide (manufacturer-stated).Strength figures are class or grade minimums from a head-marking table, not test results for the screw.

Key specifications

Selecting the right option

Choose the thread form first: the screw and the nut or tapped hole must match in thread form, diameter and pitch. Metric sizes are the nominal diameter in millimetres; compare the pitch in the table with your nut or tapped hole. Length is measured from under the head to the end of the screw. Check the across-flats size of the head before choosing a spanner; no spanner size is published for these items. Strength figures are the minimum tensile strengths for the class or grade and size range in the Hobson guide, which is a head-marking table, so treat them as the class or grade minimum and not a test result for the screw (manufacturer-stated). For a different strength level see Hobson Metric Hex Set Screw, Class 8.8, Zinc Plated, M5 to M30.

Related products

Related items: Hobson Metric Hex Set Screw, Class 8.8, Hot Dip Galvanised, M24 x 170mm, Pack of 4, Hobson Metric Hex Set Screw, Class 4.6 UTS, Hot Dip Galvanised, M6 to M24 and Hobson Metric Hex Set Screw, Class 4.6 UTS, Plain, M16, M20 and M24.