Bumax BSB8PCM160130 M16 x 130mm Hex Set Screw, Bumax 88

The Bumax hex set screw is a hex head screw with a metric thread, fitted into a tapped hole or through a clearance hole with a nut. It is listed as Bumax 88 (manufacturer-stated). There are 2 items: M16 and M20, in lengths of 130 and 140mm.

The material is not stated for these items, so none is published.

ISO 4017 is named for these screws (manufacturer-stated).

The pitch shown for each size is the coarse pitch from the thread table (manufacturer-stated).

No strength figure, stainless grade or corrosion data is published for this product; contact us if you need these confirmed before ordering.

Every item is supplied as a single item.

Where this product is used

• Fitted into a tapped hole, or through a clearance hole with a nut and washer, to clamp parts together
• Replacing a hex head screw of the same thread form, diameter, pitch and length
• Equipment and fabrication work where a hex head screw is called for

Features

• 2 items: M16 and M20, lengths 130 and 140mm
• Metric thread, pitch shown for each size
• Bumax 88
• Hex head
• ISO 4017 named for this product (manufacturer-stated)
• Supplied as a single item

Common specifications

Key specifications

Selecting the right option

Choose the thread form first: the screw and the nut or tapped hole must match in thread form, diameter and pitch. Metric sizes are the nominal diameter in millimetres; compare the pitch with your nut or tapped hole. Length is measured from under the head to the end of the screw. Check the across-flats size of the head before choosing a spanner; it is not published for these items.

Related products

Related items: Bumax Hex Set Screw, High Tensile Stainless Steel, Grade 8.8, M4 to M36, 6 to 160mm long, Bumax Hex Set Screw, High Tensile Stainless Steel, Grade 10.9, M6 to M20, 12 to 175mm long and Bumax Hex Set Screw, High Tensile Stainless Steel, Grade 10.9, M6 x 14 to 35mm.