Hobson ULEN16PD5M06 M6 Lifting Eye Nut, Stainless Steel 316 (Grade A4)

This page lists 8 sizes of the Hobson lifting eye nut: M6 to M30; stainless steel 316 (grade A4). A lifting eye nut has an internal thread and a ring (the eye) for attaching lifting gear. No working load limit is published here: confirm the rated load with Hobson before any lift.

Hobson's acronym list defines SS316 as stainless steel grade 316 (manufacturer-stated).

The pitch shown for each size is the coarse pitch from the Hobson thread table (manufacturer-stated).

The supplier description names DIN 582 for these items (manufacturer-stated).

Pack quantity is shown for each item in the table.

Where this product is used

• Fitting a lifting point to a threaded stud or bolt of the same thread and size
• Check the rated load with Hobson before any lift; no load rating is published here

Features

• 8 sizes: M6 to M30
• Metric thread
• Stainless steel 316 (grade A4)
• Pack quantity shown for each item
• DIN 582 named by Hobson for these items (manufacturer-stated)

Common specifications

Key specifications

Selecting the right option

Choose the thread form first: the nut and its bolt or stud must match in thread form, diameter and pitch. Sizes are the nominal diameter in millimetres; compare the pitch in the table with your bolt. Lifting is a safety matter: this page publishes no rated load, so confirm the working load with Hobson first. The Hobson spanner chart does not list this nut style, so the across-flats size is not published here.

Related products

Related nuts: Hobson Lifting Eye Nut, Zinc Yellow Passivate, M8 to M24, Hobson UNC Wing Nut, Natural Nylon, 1/4" to 1/2" and Hobson Metric Wing Nut, Natural Nylon, M4 to M10.