Linishall Belt Grinding Attachment 1220/50 - 1220 x 50 mm Belt

The Linishall belt grinding attachment attaches to an electric motor (preferred) or to some bench grinders, and comes in three common belt sizes: 1220 x 50 mm, 1520 x 50 mm and 1520 x 100 mm. Performance is directly related to motor power, and a minimum of 750 W (1 HP) is recommended.

The rubber contact wheel has air grooves for cooling, which gives longer wheel life, and belt tracking needs no tools.

Where this product is used

• Adding belt grinding to an electric motor or a suitable bench grinder.

Features

• Attaches to an electric motor (preferred) or some bench grinders
• Three common belt sizes: 1220 x 50, 1520 x 50 and 1520 x 100 mm
• Minimum 750 W (1 HP) motor recommended
• Longer rubber contact wheel life with air grooves for cooling
• Easy belt tracking with no tools required

Key specifications

Attachment only: it attaches to an electric motor (preferred) or some bench grinders.

Selecting the right option

Choose the attachment by the belt size you want to run. The contact wheel and drive wheel sizes differ between the 50 mm and 100 mm wide belts, as shown in the table. Performance depends on the motor, so check the power before you order. Contact AIMS if you are unsure which Linishall machine or accessory suits your job.

Related products

For a complete machine with a motor fitted see the Linishall bench mounted belt grinder and the Linishall pedestal mounted belt grinder. For a smaller 915 x 50 mm version see the Linishall 915 belt grinding attachment.