Hobson NL66UCM10 M10 Nylon Thin Hex Nut

A thin hex nut is a low-height version of the hex nut. It is often fitted as a second nut to lock a standard nut in place, or where there is less room for a full-height nut. This page lists one Hobson metric nylon thin hex nut (metric thread, black, UV stable): M10.

Nylon is a plastic, so these nuts are non-metallic.

Pitch is the coarse pitch for each diameter from the Hobson thread table (manufacturer-stated). The supplier descriptions do not state a pitch.

Where this product is used

• Fitted against a standard hex nut as a second nut on a bolt, stud or threaded rod
• Where there is less room for a full-height nut
• Where a plastic nut is wanted instead of a metal one

Features

• Size M10
• Metric thread, thin hex nut
• Nylon, black, UV stable
• Supplied as a pack of 50

Key specifications

Selecting the right option

Match the nut to the bolt, stud or rod: thread form, diameter and pitch must all agree. Sizes are the nominal thread diameter in millimetres; compare the pitch with your bolt. A thin nut is lower than a standard hex nut, so check the height your joint allows. If the joint is load-critical, confirm the nut and bolt pairing with your specification.

Related products

Related nuts: Hobson Metric Thin Hex Nut, Class 5, Hot Dip Galvanised, M20 to M36, Hobson Metric Thin Hex Nut, Class 8, Hot Dip Galvanised, M8 to M56 and Hobson Metric Thin Hex Nut, Class 8, Zinc Plated, M5 to M36.