Bumax BHB8PCM300115 M30 x 115mm Hex Bolt (Bumax 88)

This is the Bumax 88 hex bolt in size M30 x 115mm, supplied each. The item is named Bumax 88 in its description.

A hex bolt has a six-sided head for a spanner or socket. It is fitted through a clearance hole with a nut, or into a tapped hole of the same thread. The length is the second number in the size (M6 x 30mm is a 30mm length); on a hex head bolt this is normally measured from under the head to the end of the bolt. The item descriptions do not say whether the thread runs the full length or only part of it.

The item description names it Bumax 88 and does not state the material or a strength grade, so none is published here. Ask us if your job needs either.

Pitch shown is the coarse pitch listed in the thread table for each size; the item descriptions do not state a pitch, so match it to your bolt, nut or rod (manufacturer-stated).

Tensile strength, proof load and dimension data are not published on this page. If your job needs them, ask us for the manufacturer data before ordering.

Where this product is used

• Joining parts with a nut and washer through a clearance hole
• Fastening into a tapped hole of the same thread
• Where a stainless steel high tensile bolt is wanted to match stainless steel nuts and washers

Features

• 1 item: M30 x 115mm
• Named Bumax 88 in the item description
• Metric thread; coarse pitch shown for the item
• Supplied each

Key specifications

Selecting the right option

Choose the diameter (the M number) first, then the length, which is the second number in the size. Match the nut to the diameter and pitch, and add a washer if the joint needs one.

Related products

Related bolts and rod: Bumax Stainless Steel High Tensile Allthread Rod, M5 to M36, 1000mm, Bumax Stainless Steel High Tensile Hex Bolt, Grade 8.8, M6 to M36, 30 to 240mm and Bumax Stainless Steel High Tensile Hex Bolt, Grade 10.9, M6 to M16, 35 to 150mm.