Koyo NA49/22 machined needle roller bearing, 22 x 39 x 17 mm
Available
These Koyo NA machined needle roller bearings are heavy-duty bearings with a machined and ground outer ring. NA machined needle roller bearings include a ground inner ring, and the outer ring has a lubrication hole. Heavy-duty needle roller bearings have a machined and ground channel-shaped outer ring, a complement of needle rollers and a high-strength cage that retains and guides the rollers. The thick outer ring gives maximum load capacity and shock resistance with a relatively small radial cross section, and the design suits applications that need high speed capability and good lubricant retention.
The needle roller bearing is supplied with a ground inner ring, so it can be used where the shaft cannot be finished to raceway quality. A steel cage retains and guides the needle rollers, and the design gives roller stability and minimises friction between the cage and the rollers.
The range has 3 sizes with a bore diameter d of 22 to 140 mm. Koyo bearings are made by JTEKT Corporation.
Where this product is used
- Gear pumps
- Sheaves
- Automotive transmissions
- Two-cycle engines
Features
- Thick machined and ground outer ring: maximum load capacity and shock resistance in a relatively small radial cross section
- Cage retains and guides the needle rollers for optimum speed and lubricant retention capability
- Ground inner ring included, for shafts that cannot be finished to raceway quality
- Lubrication hole in the outer ring for re-lubrication
- Basic dynamic load rating C 23.3 to 116 kN and basic static load rating C0 29.6 to 346 kN
- Grease lubrication speed rating 1,700 to 10,000 min-1 and oil lubrication 2,700 to 16,000 min-1
Key specifications
| Specification | Detail |
|---|---|
| Type | Machined needle roller bearing with inner ring and lubrication hole in the outer ring, metric series |
| Inner ring bore diameter d | 22 to 140 mm |
| Roller complement bore diameter Fw | 28 to 155 mm |
| Outside diameter D | 39 to 175 mm |
| Width B | 17 to 35 mm |
| Basic dynamic load rating C | 23.3 to 116 kN |
| Basic static load rating C0 | 29.6 to 346 kN |
| Speed rating, grease lubrication | 1,700 to 10,000 min-1 |
| Speed rating, oil lubrication | 2,700 to 16,000 min-1 |
| Approximate weight | 0.089 to 2.12 kg |
| Brand | Koyo (JTEKT) |
Available sizes
| Designation | d (mm) | D (mm) | Width B (mm) | Fw (mm) | C (kN) | C0 (kN) | Speed, grease (min-1) | Weight (kg) |
|---|---|---|---|---|---|---|---|---|
| NA49/22 | 22 | 39 | 17 | 28 | 23.3 | 29.6 | 10,000 | 0.089 |
| NA4822 | 110 | 140 | 30 | 120 | 90.3 | 230 | 2,300 | 1.21 |
| NA4828 | 140 | 175 | 35 | 155 | 116 | 346 | 1,700 | 2.12 |
Selecting the right option
Choose the size from the shaft (the inner ring bore diameter d), the housing bore (outside diameter D) and the width B.
Use the NKJ series where no lubrication hole is needed, or the NK and NKS series where the shaft can serve as the raceway.
Needle roller bearings accommodate radial loads only. The maximum dynamic radial load P should be less than Cr/3, where Cr is the basic dynamic load rating, and the static radial load P0 is equal to the radial load Fr.
Fitting and use
Mount the bearing in the housing with a clearance fit if the load is stationary relative to the housing, or with a tight transition fit if the load rotates relative to the housing. For the caged bearings in this range the catalogue suggests housing bore tolerance H7 (J7) for a stationary load, K7 for general work needing larger clearance, and N7 where the load rotates relative to the housing.
On the shaft, the catalogue suggests g6 where the load rotates relative to the housing. Where the load is stationary relative to the housing, it suggests k6 for shafts up to 40 mm, m6 for shafts over 40 mm up to 140 mm, and n6 for shafts over 140 mm.
Select the bearing internal clearance to suit the operating conditions. Bearings supplied with inner rings meet the quality requirements of the ISO standards. The metric series follows the normal tolerance class of ISO 1206, with P6 and P5 classes available on request. Radial internal clearance is mostly the normal (C0) group of ISO 5753, and C2, C3 and C4 groups can be made available on request.
Locate the outer ring axially with housing shoulders or other positive means. The bearing rings should fit closely against the shaft and housing shoulders and must not contact the fillet radius, and the maximum shaft or housing fillet radius should be no greater than the minimum bearing chamfer rs min given in the variant specification.
For special operating conditions such as extremely heavy radial loads, shock loads, a temperature gradient across the bearing, a housing material with a different heat expansion coefficient from the bearing, or oscillating motion, the mounting dimensions may need to differ from the standard suggestions.
Related products
Also available from Koyo: the Koyo NKJ range with inner ring, the Koyo NKS range with lube hole and the Koyo NK range without inner ring.
Couldn't load pickup availability
Secure Checkout. We do not store credit card details
Koyo NA Machined Needle Roller Bearing with Inner Ring and Lube Hole, Metric Series (22 to 140 mm Bore): 39 mm
SKU: A0157020 | Model: NA49/22/KOYO
Koyo NA49/22 machined needle roller bearing, 22 x 39 x 17 mm, C 23.3 kN.

