Maxigear Fly Cutter Holders, FC3/16 to FC2.5-3/4

Maxigear fly cutter holders are available in five part numbers: three with a 1/2" shank (FC3/16, FC1/4, FC5/16) and two with a 3/4" shank (FC1.5-3/4, FC2.5-3/4).

The holders are counterbalanced for smoother finishes, machining a surface up to 150mm wide with a standard tool bit, on a round shank. Each part number has its own bit size and head diameter. Bits are sold separately.

Where this product is used

• Machining a surface up to 150mm wide with a standard tool bit

Features

• Counterbalanced to get smoother finishes
• Machines up to 150mm wide surface with a standard tool bit
• Round shank, 1/2" or 3/4" by part number
• Bit size and head diameter given for each part number
• Bits sold separately

Key specifications

Choosing the right option

Choose the shank first: FC3/16, FC1/4 and FC5/16 have a 1/2" shank, FC1.5-3/4 and FC2.5-3/4 a 3/4" shank. Then match the bit size and head diameter: FC3/16 takes a 3/16" bit (19mm - 3/4" head), FC1/4 a 1/4" bit (28mm - 1-1/8" head), FC5/16 a 5/16" bit (38mm - 1-1/2" head), and the two 3/4" shank holders both take a 5/16" bit, with a 38mm - 1-1/2" head (FC1.5-3/4) or a 64mm - 2-1/2" head (FC2.5-3/4). For three holders together, see the 1/2" shank set of 3 and the 3/4" shank set of 3.

Sets: 1/2" shank set of 3, 3/4" shank set of 3.