Bremick WRMSPM06 M6 x 16mm x 1.4mm Metric Flat Round Washer, Mild Steel, Plain

This is the Bremick Metric Flat Round Washer, Mild Steel, Plain, M6 to M56.

A flat round washer is a thin, flat ring fitted under a nut or bolt head. It spreads the load of the fastener over a larger area of the joint face. There are 12 Bremick metric flat round washer items (metric thread, mild steel, plain finish): M6 to M56.

Size is the nominal thread size the washer is made for. The outside diameter and thickness are the figures listed with each size; the product data does not give the hole (inside) diameter.

The product data does not state a standard or hardness for these washers, so none is published.

The pack or box quantity for each item is shown in the table. It changes with the size.

Where this product is used

• Under bolt heads and nuts to spread the clamp load on painted, coated or soft surfaces
• Protecting the surface from scoring as the nut turns
• Covering slightly oversize holes so the nut or head has something to bear on
• Dry indoor machinery, tooling and equipment
• There are 12 items with diameters from M6 to M56, so work out the size you need first and then read across the table.

Choosing the finish

A plain finish means bare steel with only a light oil film on it. It will rust quickly in damp conditions.

Keep plain parts for dry indoor use, machinery and assemblies that get painted, oiled or enclosed. Outdoors or in damp areas, a hot dip galvanised or 316 stainless alternative is the better choice.

Matching the bolt

Choose the washer by the bolt size it is named for, then check the outside diameter and thickness against the bearing area you need. A larger outside diameter spreads the load further.

Features

• 12 items: M6 to M56
• Metric thread, flat round washer
• Mild steel, plain finish
• Pack quantity shown for each item
• Uncoated plain steel: paint, oil or enclose it for protection
• Material: mild steel

Common specifications

Key specifications

Selecting the right option

Choose the size by the bolt or screw diameter the washer goes on, then check the outside diameter and thickness against your joint. The outside diameter and thickness are shown for each size in the table. Where the finish of the fastener matters, match the washer finish to the bolt and nut.

Related products

Related washers: Bremick Metric Flat Round Washer, Mild Steel, Hot Dip Galvanised, M6 to M64, Bremick Metric Spring Washer, Spring Steel, Hot Dip Galvanised, M8 to M24 and Bremick Metric Spring Washer, Spring Steel, Zinc, M6 to M24.

Product details