Bremick WRMSGM06 M6 x 16mm x 1.4mm Metric Flat Round Washer, Hot Dip Galvanised
The price shown is for the box.
Available
This is the Bremick Metric Flat Round Washer, Mild Steel, Hot Dip Galvanised, M6 to M64.
A flat round washer is a thin, flat ring fitted under a nut or bolt head. It spreads the load of the fastener over a larger area of the joint face. There are 12 Bremick metric flat round washer items (metric thread, mild steel, hot dip galvanised finish): M6 to M64.
Size is the nominal thread size the washer is made for. The outside diameter and thickness are the figures listed with each size; the product data does not give the hole (inside) diameter.
The product data does not state a standard or hardness for these washers, so none is published.
Items shown as Each are single pieces; the others are supplied in the pack or box quantity shown in the table.
Where this product is used
- Protecting the surface from scoring as the nut turns
- Covering slightly oversize holes so the nut or head has something to bear on
- General workshop and site use under hex nuts and cap screws
- Weather-exposed frames, sheds, carports and pergolas
- There are 12 items with diameters from M6 to M64, so work out the size you need first and then read across the table.
Choosing the finish
A hot dip galvanised finish is a heavy zinc coating made for outdoor and long-term exposure, including structural steelwork, roofing and fencing.
They are generally suitable for treated pine in many hazard classes, so check the timber supplier's fastener requirement. Within about 1 km of the sea, or in splash zones, 316 stainless is generally the better choice.
Matching the bolt
The size shows the bolt diameter each washer is made for. The outside diameter and thickness tell you how much bearing area you get.
Features
- 12 items: M6 to M64
- Metric thread, flat round washer
- Mild steel, hot dip galvanised finish
- Pack quantity shown for each item
- Thick hot dip zinc coating for outdoor, structural and fencing work
- Material: mild steel
Common specifications
| Specification | Detail |
|---|---|
| Sizes | M6 to M64 |
| Washer type | Flat round washer |
| Material | Mild steel |
| Finish | Hot dip galvanised |
Key specifications
| Model | Size | Outside diameter | Thickness | Supplied as |
|---|---|---|---|---|
| WRMSGM06 | M6 | 16mm | 1.4mm | Box of 500 |
| WRMSGM08 | M8 | 19mm | 1.6mm | Box of 500 |
| WRMSGM10 | M10 | 22.5mm | 2mm | Box of 500 |
| WRMSGM12 | M12 | 27.5mm | 2.25mm | Box of 200 |
| WRMSGM16 | M16 | 33.5mm | 2.75mm | Box of 200 |
| WRMSGM20 | M20 | 38mm | 3mm | Box of 150 |
| WRMSGM24 | M24 | 52mm | 4mm | Each |
| WRMSGM30 | M30 | 58mm | 4mm | Pack of 250 |
| WRMSGM36 | M36 | 70mm | 5mm | Pack of 125 |
| WRMSGM48 | M48 | 90mm | 6mm | Pack of 70 |
| WRMSGM56 | M56 | 119mm | 7mm | Box of 10 |
| WRMSGM64 | M64 | 125mm | 7mm | Box of 10 |
Selecting the right option
Choose the size by the bolt or screw diameter the washer goes on, then check the outside diameter and thickness against your joint. The outside diameter and thickness are shown for each size in the table. Where the finish of the fastener matters, match the washer finish to the bolt and nut.
Related products
Related washers: Bremick Metric Flat Round Washer, Mild Steel, Plain, M6 to M56, Bremick Metric Spring Washer, Spring Steel, Hot Dip Galvanised, M8 to M24 and Bremick Metric Spring Washer, Spring Steel, Zinc, M6 to M24.
Product details
| Model | WRMSGM06 |
|---|---|
| Part number | WRMSGM06 |
| Size | M6 |
| Washer type | Flat round washer |
| Outside diameter | 16mm |
| Thickness | 1.4mm |
| Material | Mild steel |
| Finish | Hot dip galvanised |
| Supplied as | Box of 500 |
Couldn't load pickup availability
Secure Checkout. We do not store credit card details
Bremick Metric Flat Round Washer, Mild Steel, Hot Dip Galvanised, M6 to M64: M6 x 16 mm x 1.4 mm
SKU: A0086668 | Model: WRMSGM06
Bremick WRMSGM06: M6 flat round washer, 16mm OD x 1.4mm thick, mild steel, hot dip galvanised. Box of 500.

