Molybond CDC Copper Drill and Casing Lubricant - 20kg
Available
Molybond CDC is a lead and zinc free, heat and water resistant lithium based grease containing lubricating solids including copper and graphite. It is an environmentally acceptable thread coupling compound for effectively lubricating drill rods and casings.
It is made for rotary drills, top hammer drills and exploration drills in blast hole, mining, coal and mineral exploration, oil and gas, and construction work. It is also used for crane booms, open gearing and turn tables. This is the 20kg pack.
Where this product is used
- Drill rods and casings on rotary, top hammer and exploration drills
- Blast hole, mapping and assay drilling in mining
- Geotechnical, environmental and construction drilling
- Oil and gas and mineral exploration drilling
- Telescopic crane booms and open gearing on crane slew rings
- Turn tables (5th wheel), pivot pins and slides
Features
- Copper based for excellent anti-seize properties and superior anti-galling capabilities
- Greatly reduces component wear
- Excellent longevity that can significantly extend re-lubrication intervals
- Excellent corrosion resistance
- Lead and zinc free, with no soft heavy metals and no added benzene, toluene, ethyl benzene or xylene
- NLGI No. 1 consistency with good cold weather pump-ability
- Operating temperature range of -10°C to 180°C
- Apply by brush, swab or automatic lubricator
- Can be applied over coatings of conventional greases without cleaning, and to moist surfaces without drying
- It is a hazardous chemical (eye irritation Category 2B) and non-dangerous goods. See the SDS before use
Key specifications
| Specification | Detail |
|---|---|
| Brand | Molybond |
| Product | CDC Drill and Casing Thread Compound |
| Pack | 20kg |
| Type | Lithium soap grease with copper and graphite |
| Appearance | Black, coppery coloured grease |
| NLGI classification | 1 |
| Unworked penetration | 310 to 330 (ASTM D217) |
| Base fluid | Mineral oil |
| Base oil viscosity at 40°C | 180 cSt (ASTM D445) |
| Drop point | 190°C (ASTM D566) |
| 4 ball weld load | Over 800kg (ASTM D2596) |
| 4 ball wear scar | 0.6mm, typical (ASTM D4172 at 40kg) |
| Temperature range | -10°C to 180°C |
| Hazard | Hazardous chemical, eye irritation Category 2B, causes eye irritation |
| Transport | Not regulated for transport of dangerous goods |
| part number | RP351787 |
Couldn't load pickup availability
Secure Checkout. We do not store credit card details
Molybond CDC Copper Drill and Casing Lubricant - 20kg
SKU: A0118965 | Model: RP351787
This is the 20kg pack of Molybond CDC. It is an environmentally acceptable thread coupling compound for drill rods and casings, with copper and graphite as lubricating solids and an operating range of -10°C to 180°C.

