Ninja RAZR Slash-Tec DA4 NFT Gloves, Black, Small (NIRZRSTDOBBC00S)

This listing is the black small Ninja RAZR Slash-Tec DA4 glove (NIRZRSTDOBBC00S). The glove has an 18 gauge composite liner of para-aramid and steel in black, and a black NFT (New Foam Technology) coat on the palm with thumb crotch dipping. Ninja's data sheet lists a colour coded size band, a coat that gives oil, dry and wet grip and lets air through, and a fine liner for dexterity and touch (manufacturer-stated). The glove is 25 cm long (size large).

Ninja gives EN 388:2016 4X21D, which is abrasion 4, blade cut not tested, tear 2 and puncture 1, with a cut result of D (manufacturer-stated). Ninja also gives EN 407:2004 X1XXXX (manufacturer-stated). The EN 407 result (manufacturer-stated) is read in the order burning behaviour, contact heat, convective heat, radiant heat, small molten metal splash and large molten metal splash. An X means that test was not done, so the glove has no rating for it. Contact heat level 1 is the lowest level, so this is not a heat resistant glove. Ninja lists applications as construction and mining, machinery and equipment, oil and gas, fabrication, sheet metal work, glazing, maintenance, timber and forestry and scaffolding (manufacturer-stated). The EN 388:2016 result (manufacturer-stated) is read in the order abrasion, blade cut, tear, puncture and then a cut letter from A to F. A higher number or letter is a higher level, a 0 means level 1 was not reached, and an X means that test was not done. A P at the end means the impact test was passed. Match the glove to your risk assessment, check the fit, and replace gloves that are worn, torn or contaminated. The ratings are test results on the glove material and do not describe every hazard on your site.

The other sizes are listed separately as the Slash-Tec DA4 glove, medium, Slash-Tec DA4 glove, large, Slash-Tec DA4 glove, X-large and Slash-Tec DA4 glove, 2X-large. Beaver packs the glove 12 pairs to a pack and 120 pairs to a carton (manufacturer-stated).

Where this product is used

• Construction and mining (manufacturer-stated)
• Fabrication and sheet metal work (manufacturer-stated)
• Glazing and scaffolding (manufacturer-stated)
• Machinery, maintenance, timber and forestry (manufacturer-stated)

Features

• Cut result D (EN 388:2016 4X21D) (manufacturer-stated)
• 18 gauge para-aramid and steel composite liner (manufacturer-stated)
• NFT palm coat for oily, dry and wet grip (manufacturer-stated)
• Colour coded size band (manufacturer-stated)
• Breathable coat (manufacturer-stated)

Key specifications

Selecting the right option

Choose this listing for size small. For other sizes see the Slash-Tec DA4 glove, medium, Slash-Tec DA4 glove, large, Slash-Tec DA4 glove, X-large and Slash-Tec DA4 glove, 2X-large.

Related products

Other sizes of this glove: Slash-Tec DA4 glove, medium, Slash-Tec DA4 glove, large, Slash-Tec DA4 glove, X-large and Slash-Tec DA4 glove, 2X-large. Other Ninja cut resistant gloves are the Slash-Tec FA6 glove, Slash-Tec FA6 Impact glove, RAZR NFT CA3 glove and Premier Cut D gauntlet.