Pferd WRC burr, 6 x 16mm
Available
The Pferd WRC Cylindrical Radius End Burr is a tungsten carbide burr in MICRO cut with a 6mm shank. The range has 2 options, with head sizes of 6 x 16 and 8 x 20mm (diameter x cut length) and total lengths of 55 to 60mm.
The WRC is a cylindrical burr with radius end to DIN 8032 for fine stock removal. The MICRO cut gives good stock removal on almost all materials below 68 HRC, with a high surface finish, reduced vibration and less noise. Key features: higher stock removal rate than mounted grinding points, and unlike them no change in geometry through wear, use on almost all materials up to 68 HRC, reduced wear on the tool drive from impact-free work without chatter marks, thanks to the high concentricity.
Where this product is used
- Fine stock removal on almost all materials below 68 HRC
- Finishing work where a high surface finish is wanted
Features
- MICRO Cut: fine stock removal with a high surface finish
- Cylindrical head with a radius end, 6mm shank
- Head sizes 6 x 16 and 8 x 20mm, total length 55 to 60mm
- Higher stock removal rate than mounted grinding points, and unlike them no change in geometry through wear
- Use on almost all materials up to 68 HRC
Key specifications
| Specification | Detail |
|---|---|
| Brand | Pferd |
| Shape | Cylindrical, with radius end (WRC) |
| Material | Tungsten carbide |
| Cut | MICRO |
| Shank diameter (d2) | 6mm |
| Head sizes (d1 x l2) | 6 x 16 and 8 x 20mm |
| Total lengths (l1) | 55 to 60mm |
Choosing the right option
Check that your tool holds a 6mm shank. For heavier stock removal, use cut 3 PLUS and the ALLROUND cut. Do not exceed the maximum permitted rotational speed, wear eye protection, hearing protection and a dust mask, and do not use a damaged burr.
Same cut in other shapes: Pferd ZYA Cylindrical Burr, MICRO Cut, 6mm Shank, 6 x 16 to 10 x 20mm.
Same shape in other cuts: Pferd WRC Cylindrical Radius End Burr, NON-FERROUS Cut, 6mm Shank, 6 x 16 and 12 x 25mm, Pferd WRC Cylindrical Radius End Burr, Cut 3 PLUS, 6mm Shank, 6 x 16 to 16 x 25mm.
| Option | Part number | SKU |
|---|---|---|
| 6 x 16mm | 21105076 | A0155510 |
| 8 x 20mm | 21105176 | A0155511 |
Couldn't load pickup availability
Secure Checkout. We do not store credit card details
Pferd WRC Cylindrical Radius End Burr, MICRO Cut, 6 mm Shank, 6 x 16 and 8 x 20 mm: 6 x 16 mm
SKU: A0155510 | Model: 21105076
Pferd 21105076: WRC tungsten carbide burr, 6 x 16mm, MICRO cut, 6mm shank, 55mm long. Shape: Cylindrical, with radius end (WRC).

