Pferd 35501746 Mounted Point INOX A 1 19 x 64 mm, Grit 60, 6 mm Shank

These Pferd INOX mounted points are bonded abrasive grinding points on a 6 mm shank (shape: series A shapes A 1, A 3 and A 11). This page lists 3 items in grit 60 (manufacturer-stated).

The catalogue describes the INOX type as used for rough grinding of stainless steel (INOX) castings and for grinding moulded parts made of high-temperature-resistant alloys (manufacturer-stated).

It describes the series A shapes as suited to a wide range of different contours (manufacturer-stated).

The catalogue lists a resinoid bond and a recommended cutting speed of 35 to 50 m/s for this type. Optimum and maximum speeds depend on the head size and shank, so each item in the table lists its own (manufacturer-stated).

Where this product is used

• Rough grinding of stainless steel (INOX) castings (manufacturer-stated)
• Grinding moulded parts made of high-temperature-resistant alloys (manufacturer-stated)
• Rated highly suitable in the catalogue for: stainless steel (INOX), austenitic and ferritic: surface grinding; hard non-ferrous metals (bronze, titanium, titanium alloys, hard aluminium alloys): universal grinding (manufacturer-stated)
• Rated suitable for: steels up to 1,200 N/mm²: surface grinding; cast steel: surface grinding; stainless steel: edge grinding; soft non-ferrous metals (aluminium alloys, brass, copper, zinc); nickel-based and cobalt-based alloys; grey and white cast iron: surface and edge grinding (manufacturer-stated)

Features

• INOX type with a resinoid bond (manufacturer-stated)
• Shapes: Series A (A 1), Series A (A 3) and Series A (A 11) (manufacturer-stated)
• Grit 60 in this listing
• 6 mm shank, 40 mm shank length (L2) (manufacturer-stated)
• Cool grinding, particularly suitable for temperature-sensitive materials (manufacturer-stated)
• High level of grinding comfort due to low-vibration grinding (manufacturer-stated)

Common specifications

Key specifications

Each item number is a separate combination of shape and head size. Optimum and maximum speeds depend on the head size and shank, so each item lists its own.

Selecting the right option

Match the shank to your collet (6 mm shank). A higher grit number is a finer abrasive. Check the head size and speeds against the table before ordering. The catalogue states that all PFERD TOOLS mounted points are approved for a maximum operating speed of 50 m/s, that the maximum permitted rotational speeds for each shank length and shank diameter are defined in DIN 69170 based on EN 12413 to avoid buckling of the shank, and that at least 10 mm of the shank must be clamped. Wear eye protection, hearing protection, a dust mask and gloves (manufacturer-stated).

Related products

Other Pferd INOX mounted points: Pferd INOX Cylindrical Mounted Points, Grits 24, 30 and 60 and Pferd Cylindrical Radius End Mounted Point 25 x 32 mm. Dressing stone: Pferd SE 702212 CU Dressing Stone, 70 x 12 x 22 mm.