Pferd 31408253 Mounted Point INOX Cylindrical Radius End 25 x 32 mm, Grit 30

Item 31408253 is an INOX cylindrical radius end mounted point with a 25 x 32 mm head in grit 30 on a 6 mm shank (manufacturer-stated). It is listed as a pack of 10.

The catalogue describes the INOX type as used for rough grinding of stainless steel (INOX) castings and for grinding moulded parts made of high-temperature-resistant alloys (manufacturer-stated).

It describes the cylindrical shape with radius end WR as suited to a variety of deburring and grinding jobs (manufacturer-stated).

The catalogue lists a resinoid bond for this type, a recommended cutting speed of 35 to 50 m/s, and for this item an optimum speed of 37,000 rpm and a maximum speed of 37,300 rpm (manufacturer-stated).

Where this product is used

• Rough grinding of stainless steel (INOX) castings (manufacturer-stated)
• Grinding moulded parts made of high-temperature-resistant alloys (manufacturer-stated)
• Rated highly suitable in the catalogue for: stainless steel (INOX), austenitic and ferritic: surface grinding; hard non-ferrous metals (bronze, titanium, titanium alloys, hard aluminium alloys): universal grinding (manufacturer-stated)
• Rated suitable for: steels up to 1,200 N/mm²: surface grinding; cast steel: surface grinding; stainless steel: edge grinding; soft non-ferrous metals (aluminium alloys, brass, copper, zinc); nickel-based and cobalt-based alloys; grey and white cast iron: surface and edge grinding (manufacturer-stated)

Features

• INOX type, cylindrical radius end (manufacturer-stated)
• Head size 25 x 32 mm, grit 30 (manufacturer-stated)
• 6 mm shank, 40 mm shank length (L2) (manufacturer-stated)
• Optimum speed 37,000 rpm, maximum speed 37,300 rpm (manufacturer-stated)
• Cool grinding, particularly suitable for temperature-sensitive materials (manufacturer-stated)
• High level of grinding comfort due to low-vibration grinding (manufacturer-stated)

Key specifications

Selecting the right option

Check that the 6 mm shank suits your collet. A higher grit number is a finer abrasive. Keep to the maximum speed printed for the item. The catalogue states that all PFERD TOOLS mounted points are approved for a maximum operating speed of 50 m/s, that the maximum permitted rotational speeds for each shank length and shank diameter are defined in DIN 69170 based on EN 12413 to avoid buckling of the shank, and that at least 10 mm of the shank must be clamped. Wear eye protection, hearing protection, a dust mask and gloves (manufacturer-stated).

Related products

Other Pferd INOX mounted points: Pferd INOX Tapered (KE) Mounted Points, Grit 30, 6 mm Shank and Pferd INOX Series A (A 1, A 3, A 11) Mounted Points, Grit 60. Dressing stone: Pferd SE 702212 CU Dressing Stone, 70 x 12 x 22 mm.