Pferd pointed tree burr, 10 x 20mm

It has 2 Pferd pointed tree burrs: shank-mounted tungsten carbide burrs with the TOUGH cut, all on a 6mm shank. Head sizes (diameter x cut length) run from 10 x 20 to 12 x 25mm.

The this SPG family is a pointed tree-shaped burr with a flattened tip for tough applications in dockyards, foundries and steel construction. It has the TOUGH cut for cast iron and steel below 54 HRC; it is impact-resistant, minimizes tooth chipping and breakage, and can also be used at low rotational speeds and under impact loads.

Where this product is used

• Tough applications in dockyards, foundries and steel construction
• Cast iron and steel below 54 HRC
• Deburring, chamfering, milling out for build-up welding preparation, machining weld seams and machining contours, and cleaning cast material

Features

• Head sizes (diameter x cut length): 10 x 20 to 12 x 25mm
• 6mm shank
• Impact-resistant TOUGH cut
• Reduced wear on the tool drive from impact-free work without chatter marks, thanks to the high concentricity
• Can also be used at low rotational speeds

Key specifications

Choosing the right option

Match the shank to your tool: this item has a 6mm shank. Choose the head size for the feature you are cutting. Never exceed the maximum permitted rotational speed, wear eye protection, hearing protection and a dust mask, and observe the recommended rotational speed, especially with long shanks.

Related burrs: Pferd Pointed Tree Burr SPG, TOUGH Cut, 6.35mm Shank, items SPG 1020/6,35 TOUGH and SPG 1225/6,35 TOUGH, Pferd Pointed Tree Burr SPG, Cut 5, 3 x 7 to 3 x 13mm, 3mm Shank, Pferd Pointed Tree Burr SPG, Cut 3 PLUS, 6 x 18 to 12 x 25mm, 6mm Shank.