Pferd shank-Mounted Wheel Brush RBU, 20 x 4mm

The Pferd RBU is a shank-mounted crimped wheel brush. It has a 6mm shank and steel wire filament. The range has 10 options: 20 x 4mm, 30 x 6mm, 40 x 9mm, 50 x 4mm, 50 x 15mm, 60 x 15mm, 70 x 10mm, 70 x 15mm, 80 x 15mm and 100 x 10mm (brush diameter and face width).

The RBU is suited to cleaning, derusting, smoothing, cleaning of weld seams, light deburring, and removal of corrosion and paint. Filament diameters are 0.20mm and 0.30mm. Optimum and maximum speeds depend on the size: maximum speeds run from 12,000 to 20,000rpm, so check the figures for the item you choose. Steel wire: high tensile and bending fatigue strength, temperature resistance up to 300°C. Key features: highly flexible, so it adjusts to the workpiece contour, creates fine surfaces.

Where this product is used

• Suited to cleaning, derusting, smoothing, cleaning of weld seams, light deburring, and removal of corrosion and paint
• Steel wire is highly suitable for steel and cast iron, and suitable for plastics

Features

• Brush diameter and face width: 20 x 4mm, 30 x 6mm, 40 x 9mm, 50 x 4mm, 50 x 15mm, 60 x 15mm, 70 x 10mm, 70 x 15mm, 80 x 15mm and 100 x 10mm
• 6mm shank
• Steel wire (ST), filament diameters 0.20mm and 0.30mm
• Highly flexible, so it adjusts to the workpiece contour
• Creates fine surfaces

Key specifications

Choosing the right option

Match the 6mm shank to your chuck or collet. The recommended cutting speed is 15 to 40 m/s for shank-mounted wheel brushes, depending on the application and below the maximum permitted speed. Steel wire is rated not suitable for stainless steel, aluminium or non-ferrous metals. Never exceed the maximum permitted speed marked on the brush, its label and .

The same RBU range in stainless steel wire, and the POS items: Pferd Shank-Mounted Wheel Brush RBU, Stainless Steel Wire, 6mm Shank, 30 x 6 to 100 x 10mm, Pferd Shank-Mounted Wheel Brush RBU (POS), Steel Wire, 6mm Shank, 30 x 6, 50 x 15, 70 x 15 and 100 x 10mm.