EasyRoll Rubber Tyre Wheel, Roller Bearing, Steel Centre, 100 mm | Y15R100

The EasyRoll rubber tyre wheel with a steel centre is available in 100 to 200 mm diameters, with roller bearings. The load capacity is 50 to 150 kg per wheel, depending on the size (manufacturer-stated).

Where this product is used

• Replacing wheels on trolleys and carts
• Workshop, warehouse and factory equipment
• Light industrial equipment

Features

• 100 to 200 mm diameter, 31 to 40 mm tread
• Load capacity 50 to 150 kg per wheel (manufacturer-stated)
• Roller bearings
• Steel centre

Key specifications

Options and part numbers

Selecting the right option

Check the bore ID against your axle, the hub length against the space in your fork or frame, and the load capacity per wheel against the total load shared across all the wheels. The bore ID and bush ID are as listed by EHI, so confirm the axle size you need with AIMS before ordering. Roller bearings use steel or stainless steel needle rollers in a cage, which gives rolling rather than sliding friction. EHI describes them as resistant, robust and low maintenance (manufacturer-stated). Load capacity is shown per wheel (manufacturer-stated). For castors on a four wheel trolley EHI recommends each castor is rated for at least 35 percent of the total load, which is the weight of the trolley plus what it carries (manufacturer-stated). If you are unsure which wheel suits your application, contact AIMS with the load, the floor type and how the equipment is used.

Related products

See also EasyRoll High Temperature Wheel with Axle Tube - Plain Bearing, 100 mm, EasyRoll Urethane Wheel - Ball Bearing, Nylon Centre, Grey, 100 mm and EasyRoll Cast Iron Wheel - Roller Bearing, Silver, 150 mm.