Saber 1/2" SL-4NF Included Angle Burr - Non Ferrous - 8020-SL4NF
Available
The Saber 8020-SL4NF (SL-4NF) is a 1/2" included angle burr with a non-ferrous cut. It has a tapered head with a 14 degree included angle, a 1-1/8" flute length, a 3" overall length and a 1/4" shank, in tungsten carbide. It suits fabricators and maintenance fitters who work aluminium, brass, copper and plastics.
Included angle means the angle between the two sides of the tapered head. Non-ferrous cut burrs are made for rapid stock removal with minimum chip loading, which gives longer life and less clogging. They are for non-ferrous and non-metallic materials such as aluminium, brass, copper, bronze, coarse plastic, hard rubber, reinforced plastic and fibreglass composite. Harder materials need slower speeds, smaller burrs need faster speeds and long shank burrs need slower speeds for safety. Use constant movement and light pressure, and do not sink the burr for more than one third of its periphery. For steel and cast iron, the express cut SL-4 has the same 1/2" head and 14 degree angle.
Where this product is used
- Rapid stock removal on aluminium, brass, copper and bronze
- Shaping coarse plastic, hard rubber and reinforced plastic
- Working fibreglass composite
Features
- Non-ferrous cut tungsten carbide burr
- Minimum chip loading, so longer life and less clogging
- Suits aluminium, brass, copper, bronze, coarse plastic and fibreglass composite
- Use constant movement and light pressure
- Do not sink the burr for more than one third of its periphery
- Running below optimum speed causes chipping, above it wears the teeth early
Key specifications
| Specification | Detail |
|---|---|
| Brand | Saber |
| Model | 8020-SL4NF |
| Part number | 8020-SL4NF |
| Type | Included angle burr, non-ferrous cut |
| Style | SL-4NF |
| Material | Tungsten carbide |
| Included angle | 14 degrees |
| Head diameter | 1/2" |
| Flute length | 1-1/8" |
| Overall length | 3" |
| Shank diameter | 1/4" |
| Pack quantity | 1 |
Resources
Couldn't load pickup availability
Secure Checkout. We do not store credit card details
Saber 1/2" SL-4NF Included Angle Burr - Non Ferrous - 8020-SL4NF
SKU: A0207497 | Model: 8020-SL4NF
The 8020-SL4NF is a 1/2" included angle burr with a non-ferrous cut. The head has a 14 degree angle and a 1-1/8" flute length. It is 3" long overall with a 1/4" shank.

