SIT Abrasive Nylon Cup Brush 50mm, 6mm Shaft 120 Grit BT50A
Available
The SIT BT50A is a 50 mm abrasive nylon cup brush with a 6 mm shaft that fits a hand drill or die grinder, rated to 4,500 rpm.
Abrasive nylon filament removes weld discolouration on metal, removes paint and coatings from timber, and leaves a satin finish on metal. Red is the more aggressive grade and blue is the less aggressive grade.
Where this product is used
- Removing weld discolouration from metal
- Satin finishing metal
- Removing paint and coatings from timber
- Removing paint from stone or brick
- Light cleaning in workshops and on site
Features
- 50 mm abrasive nylon cup brush
- Nylon abrasive in 120 grit (red), the more aggressive grade
- 6 mm shaft, for hand drills and die grinders
- Maximum speed 4,500 rpm
- Abrasive nylon filament that leaves a satin finish on metal
- Made in Europe
- Long lasting and non scratching
- Use in an electric drill
Key specifications
| Specification | Detail |
|---|---|
| Brand | SIT |
| Brush type | Abrasive nylon cup brush |
| Fill | Abrasive nylon filament |
| Grit | 120 grit, red |
| Brush diameter | 50 mm |
| Mounting | 6 mm shaft |
| Maximum speed | 4,500 rpm |
| Use with | Hand drills and die grinders |
| Origin | Europe |
| Part number | BT50A |
Selecting the right option
Check that the 6 mm shaft suits your drill chuck or die grinder collet. Match the brush to your machine and do not run it above its maximum speed rating. Wear eye protection and gloves when brushing, because wire can break off during use.
Related products
See also SIT End Brushes, 6mm Shaft - Crimped Steel and Abrasive Nylon, SIT Steel Crimped Cup Brush, 6mm Shaft - 50mm and 70mm and SIT Brass Crimped Cup Brush 70mm, 6mm Shaft T70BRS.
Resources
Couldn't load pickup availability
Secure Checkout. We do not store credit card details

