Stahlwille Metric combination spanners, 5.5mm

Stahlwille 13 is a metric combination spanner range in 35 sizes from 5.5 to 60mm across flats, from 100mm to 590mm long. Each spanner has the same size at both ends: an open end with the jaw angled at 15° and a 12-point ring offset by 15°.

The ring has the Stahlwille Anti-Slip-Drive (AS-Drive) profile, which puts the force on the flanks of the bolt or nut rather than the corners. The spanners are Chrome Alloy Steel, chrome-plated. The spanners are drop-forged, hardened and cooled in an oil bath, with a double-T profile for bending strength, a round finish for grip, thin-walled rings for hard-to-reach fastening points and a reinforced transition from jaw to shaft, where the highest forces act (Offset Shaft Design).

Where this product is used

• Metric nuts and bolts from 5.5 to 60mm across flats
• Ring end for a firm hold, open end for quick turns or where a ring cannot be slipped over the fastener
• Workshop, maintenance and assembly toolkits built around a combination spanner range

Features

• Combination spanner, open end and 12-point ring
• 35 metric sizes from 5.5 to 60mm
• Jaw angled at 15°, ring offset by 15°
• AS-Drive ring profile
• Chrome Alloy Steel, chrome-plated
• Made to DIN 3113 Form A / ISO 7738 Form A

Key specifications

Choosing the right option

Pick the size by the width across flats of the fastener; both ends are the same size. For extra reach choose the Stahlwille 14 long combination spanners, and for 3.2 to 5mm fasteners the Stahlwille 16 small combination spanners. Inch sizes are in the Stahlwille 13a combination spanners. To buy a spread of sizes in one pack, see the SW13/6 combination spanner set (6-piece) or the SW13/15 combination spanner set (15-piece).

Related Stahlwille products: SW13/6 combination spanner set (6-piece), SW13/15 combination spanner set (15-piece), 10 MOTOR double open end spanners, metric ratchet ring spanners.