Stahlwille Electromechanical torque wrenches

Stahlwille MANOSKOP 730D is an electromechanical torque wrench that combines cut-out and indicating in one tool, with a mount for interchangeable insert tools and a QuickRelease safety lock. The setting is entered on a foil keypad and shown on a large display, in N·m, ft·lb or in·lb. When the preset torque is reached the wrench cuts out with a tactile and acoustic signal, and it then shows the torque actually applied. A PIN code protects the presets.

The deviation of indication is ±2% ±1 digit, and it comes with a calibration certificate in accordance with DIN EN ISO 6789-2:2017. The wrench runs on two 1.5V AA batteries, and insert tools are ordered separately.

Where this product is used

• Tightening joints where the result must be recorded and traced
• Service work and series production with different tolerance limits for each joint
• Maintenance where the operator must see the torque actually applied

Features

• Cut-out and indicating modes, selectable independently
• Shows the torque actually applied after the wrench cuts out
• Units of N·m, ft·lb and in·lb
• Different tolerance limits for each joint, with red and green status in the display
• Stores 7,500 results and transfers them to a PC by USB
• PIN code protects the presets, automatic keypad lock
• Automatic compensation when a changed extension is entered
• Automatic notification of the next calibration date
• Power supply of two 1.5V AA batteries

Key specifications

Choosing the right option

Choose the 730D when you need the result recorded or want to see the torque actually applied. If a mechanical click is enough, the Stahlwille 730N clicking torque wrenches, 4 to 650 N·m is the simpler wrench with ±3% deviation of indication. If you also need angle control, see the Stahlwille 714 electronic torque and angle wrenches, 1 to 400 N·m or the Stahlwille 713R SENSOTORK electronic torque and angle wrenches, 3 to 400 N·m. Check or recalibrate the wrench regularly with a torque tester such as the Stahlwille SENSOTORK 7707W workshop torque testers, 0.4 to 1100 N·m.

Related Stahlwille products: Stahlwille 714 electronic torque and angle wrenches, 1 to 400 N·m, Stahlwille 713R SENSOTORK electronic torque and angle wrenches, 3 to 400 N·m, Stahlwille 730N clicking torque wrenches, 4 to 650 N·m, Stahlwille SENSOTORK 7707W workshop torque testers, 0.4 to 1100 N·m.