Stahlwille Torque and angle wrenches, 1-10 Nm

Stahlwille MANOSKOP 714 is an electromechanical torque and angle-controlled wrench with a mount for interchangeable insert tools and a QuickRelease safety lock.

It has four measuring modes (torque, angle, torque backed up by angle, and angle backed up by torque) and three function modes: cut-out, peak and track. Torque and angle are shown together on a high-definition colour display, and angle is measured without a reference arm. Up to 2,500 tightening records are stored, and as many as 200 joints can be programmed in up to 25 preset sequences, each with its own tolerance limits. A torque display deviation of ±2% ±1 digit and an angle display deviation of ±1°, with calibration certificates in accordance with DIN EN ISO 6789-2:2017 for torque and VDI/VDE 2648-2 for angle. It is supplied with SensoMaster 4 software and a USB cable. Insert tools are ordered separately.

Where this product is used

• Torque-and-angle tightening of critical joints
• Joints that need an assessed, recorded result, such as series assembly and documented maintenance
• Service work where the wrench is checked and adjusted with a tester or calibration system

Features

• Four measuring modes: torque, angle, torque backed up by angle, angle backed up by torque
• Three function modes: cut-out, peak and track
• High-definition colour display with side-mounted indicator lamps
• Angle-controlled measurement without a reference arm
• Stores 2,500 tightening records, 200 joints in up to 25 preset sequences
• Different tolerance limits for each joint, with acoustic and visual assessment
• Units of N·m, ft·lb and in·lb
• Micro USB interface, supplied with SensoMaster 4 software
• Power supply of four AAA batteries
• Automatic notification of the next calibration date

Key specifications

Choosing the right option

Choose the 714 when you need angle as well as torque, in a compact wrench with a wide range of sizes from 1 N·m. If you only need torque with cut-out and recording, the Stahlwille 730D electronic torque wrenches, 10 to 650 N·m is the simpler option. For angle control with a built-in ratchet, see the Stahlwille 713R SENSOTORK electronic torque and angle wrenches, 3 to 400 N·m. Verify the wrench against a tester such as the Stahlwille SENSOTORK 7707W workshop torque testers, 0.4 to 1100 N·m or the Stahlwille SmartCheck USB torque wrench testers, 1 to 800 N·m.

Related Stahlwille products: Stahlwille 713R SENSOTORK electronic torque and angle wrenches, 3 to 400 N·m, Stahlwille 730D electronic torque wrenches, 10 to 650 N·m, Stahlwille SENSOTORK 7707W workshop torque testers, 0.4 to 1100 N·m, Stahlwille SmartCheck USB torque wrench testers, 1 to 800 N·m.