Stahlwille Phillips screwdriver sockets, PH#2

Stahlwille 44P is a range of Phillips screwdriver sockets for 1/4" drive: 4 tip sizes from PH1 to PH4, each 28mm long, for Phillips screws. Each socket has a Phillips tip at one end and a 1/4" internal square drive at the other, so it turns on a 1/4" drive ratchet, handle or extension. The tips are to DIN 5260 and the sockets are Chrome Alloy Steel, chrome plated.

A bit socket in a ratchet gives a faster and more compact drive than a screwdriver handle. The PH number is the Phillips size, so match it to the recess in the screw head. These sockets are for hand use, so keep to hand-driven work.

Where this product is used

• Phillips screws from PH1 to PH4
• Phillips screws where a 1/4" drive ratchet gives better access than a screwdriver
• Replacing a worn or missing Phillips screwdriver socket from a 1/4" drive set

Features

• 4 Phillips tip sizes from PH1 to PH4
• 28mm long
• 1/4" internal square drive
• Tips to DIN 5260
• Chrome Alloy Steel, chrome plated
• For hand use

Key specifications

Choosing the right option

Pick the tip by the Phillips size of the screw. Turn it with a 415 1/4" drive reversible ratchet; the 405 1/4" drive extension bars add reach and the 407 1/4" drive universal joint lets you work at an angle. For hexagon and Torx tips on the same drive see the 44 INHEX hex screwdriver sockets, 1/4" drive and the 44KTX Torx screwdriver sockets, 1/4" drive.

Related Stahlwille products: 415 1/4" drive reversible ratchet, 405 1/4" drive extension bars, 407 1/4" drive universal joint, 409 1/4" to 3/8" drive adaptor.