Hobson BHG8ZF1000250F 1"-14 x 2-1/2" UNS Hex Bolt, Grade 8, Zinc

This page lists 7 Hobson UNS hex bolt items (Grade 8, zinc): 1"-14, in lengths of 2" to 6". A hex bolt has a hexagonal head and a threaded shank, and is fitted with a nut or screwed into a tapped hole.

Hobson lists grade 8 as high tensile, and its class and grade chart pairs imperial grade 8 with metric class 10.9 (manufacturer-stated).

The supplier names the 1"-14 size UNS, and gives 14 threads per inch in the item name.

The Hobson High Tensile Stock List (April 2011) prints the heading Grade 8 AS2465 for the catalogue items on this page (manufacturer-stated).

Spanner sizes are the width across flats (A/F) from the Hobson spanner chart, using its grade 5 and 8 column (manufacturer-stated).

All items are supplied as a box of 5.

Where this product is used

• Clamping parts together through a clearance hole, with a nut on the far side
• Screwed into a tapped hole of the same thread where a nut cannot be fitted
• Fixing with a flat washer under the head or nut to spread the load

Features

• 7 items: 1"-14, 2" to 6" long
• UNS thread, hex head
• Grade 8, zinc
• Minimum tensile strength for each size from the Hobson guide, shown on each item page (manufacturer-stated)
• Catalogue pack weights shown where the Hobson stock list prints them (manufacturer-stated)
• Grade 8 AS2465 named by Hobson for catalogue items (manufacturer-stated)

Common specifications

Key specifications

Pack weights are as printed in the Hobson High Tensile Stock List, April 2011, and apply to the pack shown (manufacturer-stated).

Selecting the right option

Choose the thread form first: the bolt and its nut must match in thread form, diameter and pitch. Sizes are nominal diameters in inches; compare the threads per inch shown for each item with your nut. Length is measured from under the head to the end of the bolt, so choose size and length together. Strength figures are the minimum tensile strengths for the class or grade and size range in the Hobson guide, which is a head-marking table, so treat them as the class or grade minimum and not a test result for the bolt (manufacturer-stated). Spanner size is the width across flats of the head and nut, from the Hobson spanner chart.

Related products

Related bolts: Hobson UNC Hex Bolt, Grade 8, Zinc, 1/4" to 1" x 1/2" to 10", Hobson UNC Hex Bolt, Grade 8, Zinc, 5/16" to 1" x 1" to 11" and Hobson UNF Hex Bolt, Grade 8, Zinc, 1/4" to 7/8" x 3/4" to 8".