Chemical Manufacturing Industrial Supplies

AIMS Industrial supplies chemical manufacturers, agrichemical producers, coatings and adhesives plants, industrial gas facilities, and speciality chemicals operations across Australia. Corrosion-resistant fasteners, hazardous-area equipment, chemically-inert elastomers, spill response, PPE for solvent and acid handling, and every consumable a chemical plant needs to operate under AS/NZS 60079, AS 1940 and Australian Dangerous Goods compliance.

Chemical Industry Compliance Framework

Chemical manufacturing in Australia operates under a stacked regulatory framework covering hazardous areas, dangerous goods storage, worker exposure limits, and product-specific standards. AIMS supplies to that framework — Certificates of Conformance and Safety Data Sheets available on any product where compliance documentation is required.

Standards regularly referenced across chemical industry procurement include:

• AS/NZS 60079 series — explosive atmospheres classification, Ex protection types, equipment protection levels
• AS 1940 — storage and handling of flammable and combustible liquids
• AS/NZS 2243 series — safety in laboratories (for R&D operations)
• AS/NZS 60529 — IP ratings for equipment ingress protection
• AS 3780 — corrosive substance storage
• AS 4326 — bulk fuel storage
• ADG Code — Australian Dangerous Goods Code (transport and packaging)
• WHS Regulations Chapter 7 (Hazardous Chemicals) — Safe Work Australia framework
• AICIS — Australian Industrial Chemicals Introduction Scheme (chemical registration)

Hazardous Area Equipment

Where flammable atmospheres are present or expected, equipment must be certified to the appropriate zone classification:

• Zone 0/20 — atmosphere present continuously
• Zone 1/21 — atmosphere likely in normal operation
• Zone 2/22 — atmosphere unlikely, short duration if present

See our Electric Motors for Hazardous Areas Guide for equipment selection covering Ex d (flameproof), Ex e (increased safety), Ex n (non-sparking), and Ex i (intrinsic safety) protection types. AIMS supplies Ex-rated electric motors from TechTop and other manufacturers where IECEx / ATEX certification is required.

Corrosion-Resistant Fasteners

Chemical exposure kills standard fasteners fast. AIMS supplies the grades that survive:

• 316L stainless — general chemical resistance, standard specification for most chemical service. Bumax, Hobson, Inox World across every profile.
• Duplex and super-duplex — for chloride-heavy environments, seawater cooling loops, harsh acid service. Special-order through AIMS.
• Hastelloy, Monel, Inconel — for aggressive acid or high-temperature chemical service. Special-order sourcing available.
• Titanium — for ultra-corrosive service (bleach circuits, certain acid service). Special-order.

Full stainless steel fastener range — hex bolts, socket head cap screws, nuts, washers, threaded rod, and specialty fixings. Grade certification documentation available on request for compliance dossiers.

Chemically-Resistant Elastomers

Getting seal and gasket materials right is the difference between a functioning plant and a chemical release incident. AIMS supplies:

• Viton (FKM) — aromatic and chlorinated solvents, fuels, most acids at moderate temperature
• EPDM — ketones, hot water, steam, dilute acids and bases; NOT for petroleum or aromatic solvents
• PTFE (Teflon) — near-universal chemical resistance, ideal for aggressive service where compression set isn't critical
• NBR (Buna-N) — petroleum oils, aliphatic hydrocarbons; not chemical service
• FFKM (Kalrez-type) — special-order for extreme chemical service, aggressive amines, high temperature

Full range in o-rings, gaskets, gasket materials, and spiral wound gaskets. See our O-Ring Chemical Resistance Chart covering 82 chemicals across NBR, Viton, EPDM and Silicone — the reference AIMS engineers use when matching material to service.

Spill Response & Containment

Every chemical facility needs first-response absorbents and containment. AIMS supplies:

• Spill kits — general purpose, hydrocarbon-specific, and chemical (universal) sorted by 25L, 50L, 120L, 240L, and 660L capacity
• Absorbents — SpillFix and MAXSorb organic granular absorbent, floor-sweep, pads, socks, and pillows
• Bunding and drip trays — polyethylene, steel, spill pallets for IBC and drum containment
• Emergency showers and eyewash — for point-of-use chemical splash response. Compliant to AS 4775.

Chemical PPE

Personal protective equipment matched to the chemical service:

Chemical Gloves

Nitrile, neoprene, butyl, and PVA chemical-resistant gloves. Selection depends on chemical exposure — call us with your primary chemical service and we'll match the glove.

Respiratory Protection

Half-face and full-face respirators from Mack, Frontier and others. Cartridge selection covers organic vapour (OV), acid gas (AG), ammonia, formaldehyde, particulate P1/P2/P3, and combinations. See our Respirator Selection Guide.

Eye & Face Protection

Chemical splash goggles, indirect-vent goggles, and full face shields. Compliant to AS/NZS 1337.1.

Chemical-Resistant Clothing

Coveralls — disposable Tyvek and Tychem-equivalent for solvent and acid handling. Chemical-resistant aprons and sleeves for point-of-exposure protection.

Chemical-Resistant Footwear

Safety boots with chemical-resistant soles. Rubber gumboots for high-exposure roles. AS/NZS 2210.3 compliant.

Chemically-Inert Lubrication

Where standard petroleum-based lubricants attack seals or contaminate product streams, AIMS supplies:

• PTFE-based dry film lubricants — for chemical-service valve stems, dosing pump linkages
• Silicone greases — for chlorine, oxygen, and acid service
• Perfluoropolyether (PFPE) — for oxygen service, aggressive chemical exposure. Special-order.
• Food-grade greases — NSF H1 for facilities producing chemicals that touch food or personal care streams

Full grease range, oils and hydraulic fluids, and speciality Loctite anaerobic sealants and thread compounds appropriate for chemical service.

Chemical Transfer & Materials Handling

AODD chemical transfer pumps with PTFE or FKM diaphragms. Drum pumps and drum handling equipment. Chemical-resistant hose and tubing in PTFE-lined, EPDM, or specialty compounds. Chemical-resistant hose fittings and camlock couplings in 316L stainless.

Marking, Signage & Dangerous Goods

Australian Dangerous Goods placarding, hazard warning signs, pipe marking, and lockout-tagout for chemical facility WHS compliance. Full signage range including Brady chemical labels. Lockout-tagout equipment — AS/NZS 4836 compliant kits.

Trade Accounts & Procurement

Chemical industry procurement typically requires SDS documentation, material CoC, and supplier qualification tied to specific AICIS or APVMA product registration. AIMS trade accounts offer 30-day EOM terms and dedicated account contact. ABN 85 152 943 596 — Fully Chic Pty Ltd t/as AIMS Industrial Supplies. RFQ lodgement, PO processing and compliance documentation on request.

For extended supplier qualification — audit history, quality management, controlled-substance handling verification, or dangerous-goods freight coordination — talk to the Sydney team to arrange the paperwork alongside your first order.

Australian Chemical Manufacturing Hubs

AIMS supplies chemical operations across major Australian manufacturing regions — Botany and Silverwater in Sydney (Orica, Redox, Recochem territory), the Yarraville, Altona and Laverton corridor in Melbourne (Dow, Nufarm, IXOM), Kwinana in Perth (BP, CSBP), Gladstone in Queensland (Orica, Incitec Pivot), and Osborne in South Australia. Warehouse dispatch from Milperra, Sydney, with Australia-wide freight through Australia Post + FedEx. Dangerous goods freight coordinated through certified DG forwarders where required.

Get in Touch

Talk to the AIMS chemical industry team about your plant requirements, hazardous area equipment sourcing, chemical-resistance selection, or PPE specification. Phone (02) 9773 0122, use our contact form, or request a quote for a specific bill of materials.

Chemical-industry industrial supplies. Delivered Australia-wide from Sydney.