Mining Industrial Supplies

Industrial Supplies for Australian Mining — Predator Belts, Macnaught Pumps, Heavy-Duty MRO

Australian mining runs on industrial supplies — bearings that survive abrasive plant environments, belts that handle crusher shock loads, pumps that move diesel and oil reliably in remote conditions, safety gear that meets AS/NZS standards, and lubricants formulated for the wear conditions Australian mines see. AIMS Industrial has been supplying Australian mining maintenance teams, fitters, contractors and procurement buyers since 1988 from our Milperra (Sydney) warehouse — 130,000+ industrial product lines from 300+ trusted brands, dispatched daily to site addresses and mine offices across WA, QLD, NSW, SA and the NT.

The Gates Heavy-Duty Belt Range — Built for Mining

The single most demanding application for industrial drive belts is mining — shock loading on jaw crushers and screens, continuous high-torque drives on conveyor heads, abrasive contamination from dust and fines, and the cost of unplanned downtime measured in tens of thousands of dollars per hour. AIMS stocks the full Gates heavy-duty cluster engineered for exactly these conditions:

• Gates Single Predator V-Belts — aramid (Kevlar) tensile cord for shock loads, overload, and abrasive environments. Classical A/B/C, narrow 3VX/5VX/8VX and metric SPB/SPC sections. The aramid cord delivers significantly higher fatigue resistance than polyester — Predator belts typically outlast standard V-belts 2-3× on genuinely abusive applications.
• Gates Banded Predator V-Belts — Predator construction in banded form for multi-belt high-torque drives. The tie band eliminates belt whip and turnover on heavy reciprocating loads (crushers, compressors, conveyor heads).
• Gates PolyChain GT Carbon and PolyChain GT Carbon Long — high-power synchronous belts that replace roller chain on heavy industrial drives. No lubrication required, longer service life, higher power density. Standard fit for chain-replacement programs across mineral processing plants.
• Gates FRAS Fire-Resistant V-Belts — meets AS 1180.7 / AS 1334.10 for underground and surface coal mining applications. Required specification for coal operations.

Fluid Handling — Macnaught, Alemlube, Diesel & Oil Transfer

Fluid handling on mine sites means diesel transfer to plant and vehicles, oil dispensing for service intervals, AdBlue/DEF for fleet, grease for lube bays, and water/coolant management. AIMS leads with the Australian-engineered brands that have served mining for decades:

• Macnaught — Australian-made fuel transfer pumps, oil dispensing equipment, grease guns, lube gun kits, oil meters and diesel transfer kits. The Macnaught range is the workhorse of Australian mining fluid handling.
• Diesel Transfer Pumps — 12V, 240V and manual diesel pumps for drum, IBC and bulk tank dispensing. Bi-lobe, rotary vane and submersible configurations from Alemlube, Macnaught, Piusi.
• Fuel Equipment — tanks, filters, meters, dispensing nozzles, fuel monitoring accessories.
• Industrial Pumps & Fluid Handling — diaphragm pumps for slurries and chemicals, drum pumps for solvents and AdBlue, drainage and submersible pumps for site dewatering.

Bearings for Mining Plant & Processing

Mining plant runs on bearings — conveyor head and tail pulleys, crusher main shafts, mill trunnion bearings, screen vibrator units, pump and motor drives. AIMS is a specialist Australian bearings supplier with 492 bearing lines from the major manufacturers used across Australian mining:

• Industrial Bearings — ball, roller, thrust, housed pillow blocks. SKF, NSK, NACHI, Koyo, NTN, FYH. Spherical roller bearings for self-aligning shock-load duty, cylindrical roller for high radial loads, pillow block units for conveyor and processing equipment.
• For brand cross-referencing (SKF ↔ NSK ↔ NACHI ↔ NTN ↔ Koyo ↔ FAG suffix codes), see our Bearing Cross Reference Guide.
• For maintenance practice — lubrication intervals, inspection methods, common failure modes — see the Bearing Maintenance Guide.

Mining Safety & PPE

Mining safety standards (WHS Act, MSIC/MARCSTA accreditations, site-specific PPE requirements) drive consistent demand for AS/NZS-compliant safety gear. AIMS stocks the full range:

• Safety & PPE — hard hats (AS/NZS 1801), safety glasses and goggles (AS/NZS 1337.1), hi-vis garments (AS/NZS 4602), safety footwear (AS/NZS 2210.3), respirators (AS/NZS 1716).
• Hand Protection — cut-resistant gloves, chemical-resistant gloves, mechanic gloves, anti-vibration gloves.

Lubricants, CRC, Degreasers, Anti-Seize

Mining maintenance consumes lubricants and chemistries at volume — gear oils for drive boxes, hydraulic oils for plant rams, greases for bearings and bushes, anti-seize for fastener assembly, degreasers for parts wash, contact cleaners for electrical:

• Industrial Lubrication — hydraulic oils (ISO VG 32/46/68), gear oils, greases, anti-seize compounds, specialty mining lubricants (329 lines).
• CRC Industries — chain lube, contact cleaner, anti-seize, corrosion inhibitor, brake cleaner, parts wash. Full CRC range stocked.
• Industrial Grease — moly, lithium-complex, calcium sulphonate, EP greases for mining bearing and bush applications.
• Hydraulic Oil — AW, HV, HFC, HFD grades across ISO VG 32, 46, 68.
• Degreasers & Cleaners — heavy-duty degreaser, parts wash, solvent, brake cleaner for shop and breakdown response.

Fasteners, Lifting, Material Handling

• Fasteners — metric and imperial bolts, nuts, washers, structural high-tensile grades (8.8, 10.9, 12.9), stainless 316/304 for corrosive environments. Bulk pack pricing for site quantities.
• Lifting Equipment — chain slings, webbing slings, shackles, hooks, eye bolts, beam clamps. Rated and tagged for site WHS compliance.
• Castors & Material Handling — industrial castors, trolleys, conveyor wheels, storage bins for workshop and parts-store fit-outs.
• Abrasives — grinding wheels, flap discs, cutting discs, sanding belts for fabrication and breakdown welding work.
• Welding Supplies — Bossweld consumables, MIG/TIG/stick wire and electrodes, regulators, helmets for site fab shops.

Australian Mining Regions We Service

AIMS dispatches daily to all major Australian mining regions:

• Western Australia — iron ore (Pilbara — Newman, Tom Price, Karratha, Port Hedland), gold (Goldfields — Kalgoorlie, Leonora), lithium and nickel (Yilgarn), oil & gas (North West Shelf). Road freight 5–7 business days, air freight for breakdown response. See our Perth/WA mining page for regional detail.
• Queensland — coal (Bowen Basin — Moranbah, Blackwater; Surat Basin), bauxite/alumina (Weipa, Gladstone), copper-gold (Cloncurry, Mt Isa). Road freight 1–2 days to Brisbane, daily freight to regional QLD mining service centres.
• New South Wales — coal (Hunter Valley, Western Coalfields), copper-gold (Cadia). Dispatch from Milperra (stock items within 1 business day), next-day delivery to Hunter Valley/Singleton/Muswellbrook.
• South Australia — copper-uranium-gold (Olympic Dam), iron ore (Whyalla, Iron Knob), mineral processing. Road freight 2–3 days.
• Northern Territory — manganese (Groote Eylandt), gold (Tanami, Pine Creek), bauxite (Gove). Air and road freight options.
• Tasmania — copper-zinc (Mt Lyell, Rosebery), tin (Renison). Road and shipping options.

Procurement, Trade Accounts & Site Orders

• Trade accounts — net-30 terms available to qualified mining contractors and service companies on application.
• Government & Tier-1 mining accounts — automatic credit accounts available for verified state government, federal agency and major Tier-1 mining customers. No drawn-out application process for genuine procurement-managed accounts.
• Bulk & project pricing — pallet quantities, shutdown supply packages, fastener and consumable production-run quantities — call us first on (02) 9773 0122. We can usually improve on online pricing and freight for serious volumes.
• Breakdown response — for urgent bearing, belt, hose or seal failures, our team will prioritise dispatch and confirm freight ETA before you commit to the order. Australian-staffed support during business hours.

Why Mining Operations Source from AIMS

• Range breadth — 130,000+ products, 300+ brands. One supplier covers what would otherwise require six or more accounts.
• Mining-experienced product team — the AIMS sales team understands fluid handling, drive transmission, bearings and plant maintenance — not call-centre script readers.
• Australian-owned, Australian-staffed — phone support in business hours, real product knowledge, no offshore call centres.
• Reliable dispatch — in-stock items typically ship within 1 business day from our Milperra warehouse. Items we need to bring in: freight ETA confirmed when you place the order. Air freight available for genuine breakdown response.
• Since 1988 — three decades of Australian industrial supply, trusted across Australian mining and resources.

Contact AIMS for Mining Orders

Phone: (02) 9773 0122 — Mon–Fri 08:00–17:00 AEST. Voicemail and email outside hours.

Email / online enquiry: contact our team or request a quote with your part numbers, quantities and site address — we'll respond with pricing, freight and ETA.

Online ordering: Browse our full catalogue and order online. Australian-wide shipping calculated at checkout based on weight, dimensions and your delivery suburb or remote site address.

For shutdown supply packages, breakdown response, or bulk procurement enquiries — call first. We work with your timeline.