Austsaw wave design turbo diamond blade, 115

The Austsaw Super Turbo Wave Diamond Blade is a turbo rim diamond cutting blade with a wave design body, for concrete, pavers, brick, cement sheet and stone and as suitable for wet and dry use. There are five sizes from 103mm to 230mm, each supplied as a single carded blade.

The blade's wave design adds strength to the blade body and helps extract dust build up, and is giving a smooth cut with less vibration, with an extremely high diamond count. It is for ceramic bricks, pipes and terracotta, concrete blocks, bricks, pavers, pipes and reinforced concrete, cement sheet, and stone including basalt, bluestone, granite, marble and slate. The 103mm to 125mm blades are for angle grinders, and the 180mm and 230mm blades for portable saws or angle grinders. Kerf rises from 1.8mm on the 103mm blade to 2.5mm on the 230mm blade, and the maximum speed falls from 15,000 RPM to 6,790 RPM, so check the blade against your tool.

Where this product is used

• Cutting concrete, pavers and concrete blocks
• Cutting brick and ceramic pipes
• Cutting cement sheet and board
• Cutting granite, marble and bluestone

Features

• Wave design adds strength to the blade body and helps extract dust build up
• Extremely high diamond count
• Fast, smooth, clean cutting with less vibration
• Suitable for wet and dry use
• Five sizes from 103mm to 230mm, each a single carded blade

Key specifications

Choosing the right option

Choose the diameter and bore your tool takes and check the maximum speed in the specifications. For the same wave design with a diamond count rated HIGH see Austsaw Boxer Super Turbo Wave Diamond Blade; for tile and porcelain work see Austsaw Continuous Rim Diamond Blade or Austsaw Ultra Thin Diamond Blade.

See also: Austsaw Boxer Super Turbo Wave Diamond Blade, Austsaw Segmented Diamond Blade, 103mm to 230mm, Austsaw Demo Raptor demolition diamond blade.