Beaver double sheave blocks with swivel hook

Beaver double hand operated sheave blocks with swivel hook are double sheave rigging blocks (pulley blocks) with an integrated swivel hook and safety latch. The double block is a hand operated double sheave block built for heavy-duty use, for controlled lifting and manoeuvring of loads. Compliance with AS 2089.

The swivel hook attaches the block to an anchor point, and the sheave turns the rope or wire rope through the block to change the direction of the pull.

Where this product is used

• Changing the direction of a rope or wire rope pull through the sheave, with the block attached to an anchor point by its swivel hook
• Changing the direction of a rope or wire rope pull

Features

• Double sheave with swivel hook and safety latch
• WLL for each size, from 250kg to 250kg
• Sized for 5 to 6mm wire rope or 10 to 12mm fibre rope across the sizes
• The block complies with AS 2089
• 2 sizes, 63 to 76mm sheave diameter, with dimensions for each

Key specifications

Choosing the right option

The pull on the rope and the load carried by the block are not the same thing, so check the WLL against the total load the block will carry, including the pull from each rope leg. Lifting equipment must be used within its marked working load limit (WLL), inspected before each use, and selected and used in line with your site lifting procedure and the relevant Australian Standards.

E. G is the sheave diameter. Beaver sells the blocks singly (unit of measure: each).

Choose the sheave diameter and rope size to suit the rope you are using, then check the WLL against the load the block will carry.

Related Beaver sheave products: Beaver Single Hand Operated Sheave Blocks with Swivel Hook, 63 to 152mm, Beaver Hand Sheaves for Wire Rope (Yellow), 63 to 102mm.

Wire rope and fittings: Beaver G2070 7 x 7 Galvanised Wire Rope, Beaver G1770 6 x 36 Galvanised Wire Rope, Beaver Galvanised Wire Rope Grips - Not for Lifting, Beaver Hot Dipped Galvanised Wire Rope Thimbles.