Dixon BioPharm solid end cap, 2-1/2"

This is the Dixon BioPharm Solid End Cap PL Finish - SF1.

This Dixon BioPharm solid end cap closes off the end of a clamp-style BPE tube connection. It is 316 stainless steel and comes in 7 sizes: one cap for 1/2" and 3/4" tube, one for 1" and 1-1/2" tube, then 2, 2-1/2, 3, 4 and 6". The PL finish (SF1) is mechanically polished on both surfaces: the outside is 0.812 and the inside is 0.508.

The cap is made to ASME BPE 2012. Its packing page says each fitting is capped for transport, with a blue cap marking the PL finish.

Where this product is used

• Transport of liquid media in the biotechnology, cosmetic and pharmaceutical industries
• Blanking off an unused clamp connection on a BPE tube run or vessel outlet
• Systems where a mechanically polished inside surface (.508) meets the process specification

Features

• Solid end cap in the BioPharmaceutical Fittings (BPE) range
• PL finish (SF1): outside.812 and inside.508, both mechanically polished
• Made to ASME BPE 2012
• Sizes: one cap each for 1/2 to 3/4" and 1 to 1-1/2" tube, then 2 to 6"

Key specifications

Choosing the right option

Choose the cap by the tube size of the clamp connection it closes. The 1/2 to 3/4" and 1 to 1-1/2" caps each cover two tube sizes, so check the size against your ferrule or tube before ordering. The PL finish is mechanically polished inside and out; the PM finish is electropolished inside.

Mechanical polishing is smoothing the surface with tools and progressively finer abrasives, and electropolishing as an electrochemical process that removes material and leaves a smoother, mirror-like surface.

Related Dixon products: Dixon BioPharm Solid End Cap PM Finish - SF4, Dixon Automatic Weld Ferrule PL Finish - SF1 and Dixon 304 Stainless Steel Sanitary Single Pin Squeeze Clamp.

Product details