Loctite Super Glue Power Flex Gel Control 3g

Loctite Super Glue Power Flex Gel Control is a one-part, clear, non-drip ethyl cyanoacrylate gel with a Control applicator, supplied as a 3g pack.

It is shock resistant and suited to applications where some flexibility is needed. The 4g pack is for indoor use only.

Where this product is used

• Applications that need some flexibility and shock resistance
• Repairs where a non-drip gel is wanted
• Ceramic repairs (ceramic bonds withstood more than 50 dishwasher cycles in lab testing)
• Indoor repairs at 15 °C to 30 °C

Features

• Clear, non-drip gel
• One-part ethyl cyanoacrylate, no mixing
• Initial adhesion in 10 to 30 s, depending on substrate
• Tensile shear of 15 to 25 N/mm² after 12 to 24 hours (ISO 4587)
• Water resistance conforms to EN 204 D3
• Density 1.1g/cm³ at 20 °C

Key specifications

Choosing the right option

This is a 3g gel for light repairs. For a gel with published steel and aluminium data see Loctite 454 Instant Adhesive Gel 20g, or for another gel format see Loctite 410 Black Toughened Instant Adhesive 20g.

See also: Loctite 410 Black Toughened Instant Adhesive 20g, Loctite 454 Instant Adhesive Gel 20g, Loctite 416 Super Bonder Instant Adhesive 25ml, Loctite 406 Instant Adhesive for Plastics and Rubbers.

Using it

Apply at 15 °C to 30 °C and at least 30% relative humidity. Hold the parts for at least 1 minute, then allow at least 10 minutes, preferably overnight, for full strength.

The bond is water resistant, but not intended for continuous exposure to moisture.

Initial adhesion is 10 to 30 seconds depending on the material.

Storage and handling

Store in a cool, dry place, upright.

Limits and safety

It is not recommended on polypropylene, polyethylene, PTFE, vinyl, silicone rubber, foams, expanded polystyrene, synthetic fabric, glass and glazed surfaces or very soft leather. Avoid dusty, dirty or wet surfaces, permanently wet areas, and assemblies that will hold hot liquids.