B-Safe Low Profile Purlin Mounted Anchor, Spandek Roof, 15 kN (BSC5006LSLP-L)

The B-Safe low profile purlin mounted anchor, code BSC5006LSLP-L, is a permanent anchor point made from 316 grade stainless steel with a 16 mm x 120 mm anchor bolt, for low profile Spandek roof sheeting fixed to steel purlins (manufacturer-stated). B-Safe rates its purlin mounted anchors at 15 kN, or 1 person, and says they suit commercial, industrial and residential applications and install quickly (manufacturer-stated).

B-Safe's installation table for this code lists the roof profile as Spandek 0.42 BMT, a minimum purlin of steel C purlin 100 x 50 mm x 1.5 mm thick, and a maximum purlin spacing of 1200 mm. B-Safe also says the structure the anchor is installed in must have sufficient strength to sustain the applied load, and refers to AS/NZS 1891.4 (manufacturer-stated). B-Safe's technical guide says an anchorage point must be able to withstand a minimum load of 15 kN for one person and 21 kN for two persons, and that the anchorage should be inspected before each connection (manufacturer-stated). This anchor is rated for one person.

Fall protection equipment must be selected, installed, used, inspected and maintained by trained people in line with the manufacturer's instructions and the relevant Australian Standards. Ask AIMS for the instructions and test certificates before you order, and never use it for any purpose other than the one it was made for.

Where this product is used

• Permanent anchor point on purlin supported Spandek (low profile trapezoidal) roofs (manufacturer-stated)
• Commercial, industrial and residential applications (manufacturer-stated)

Features

• 316 grade stainless steel with a 16 mm x 120 mm anchor bolt (manufacturer-stated)
• Rated 15 kN, or 1 person (manufacturer-stated)
• Low profile design for Spandek roof sheeting (manufacturer-stated)
• Designed as a permanent purlin mounted anchor with quick and easy installation (manufacturer-stated)

Installation and inspection

• Install only to B-Safe's instructions, on the purlin size and spacing in the table above. Ask AIMS for the installation instructions before you order.
• B-Safe's technical guide lists anchorages for inspection every 12 months by a height safety equipment inspector, as recommended by the manufacturer up to a maximum of 5 years, per AS/NZS 1891.4 (manufacturer-stated).
• B-Safe publishes a load direction diagram for this anchor in its catalogue. Ask AIMS for a copy before installing, as the permitted load directions are not repeated here.

Key specifications

Selecting the right option

Match the anchor to the roof profile (Spandek, 0.42 BMT), the purlin (steel C purlin 100 x 50 x 1.5 mm or heavier) and the purlin spacing (up to 1200 mm). If your roof is a different profile, ask AIMS about the other B-Safe anchors before you order.

Related products

Other B-Safe height safety products: the attachment strap, the T-bar roof anchor, the full body harness and the shock absorbing lanyard. An anchor is one part of a fall arrest system, so check every item before you order.