Hobson Metric Stud Chemical Anchor Kit, M8

This is the Hobson metric stud chemical anchor kit (zinc yellow finish and grade 5.8 designation). The range has 6 items: M8 to M24. A chemical anchor stud is a threaded stud that is fixed into a drilled hole with a chemical (resin) anchoring system.

These items are "Grade 5.8".

Where this product is used

• Setting a threaded stud in concrete with a chemical anchoring system
• Fixing base plates, posts and brackets where a threaded stud and nut are wanted
• Jobs where the stud length is chosen to suit the fixture and the hole depth
• Dry, indoor and sheltered locations such as workshops, enclosed machinery and interior fit-out
• Choosing between the 6 items here: they cover diameters from M8 to M24

Features

• 6 items: M8 to M24
• Zinc yellow finish and grade 5.8 designation
• Grade 5.8
• Pack quantities from 5 to 10, shown for each item
• Zinc yellow passivate finish, for indoor and sheltered locations

Key specifications

Choosing the right option

Choose the stud size and length to suit the fixture and the hole depth the job needs.

A yellow zinc finish is electroplated zinc with a passivate layer that shows as yellow. The coating is thin, so keep these chemical anchor studs for dry or sheltered locations and not for treated pine. If the job is outside, look at hot dip galvanised instead; within about 1 km of the sea, 316 stainless is generally the better choice.

For load-critical, structural or lifting joints, confirm the fastener against the engineer's specification. Fasteners are not lifting rated unless marked.

For load-critical, structural or lifting joints, confirm the fastener against the engineer's specification. Fasteners are not lifting rated unless marked.

Use the manufacturer's installation data for hole size and depth.

Related anchors: Hobson Stud Chemical Anchor Kit, Class 8.8, Flat Top Angle Cut, Hot Dip Galvanised, M10 to M24, Hobson Stud Chemical Anchor Kit, Class 5.8, Chisel Point, Hot Dip Galvanised, M8 x 110mm, Box of 10 and Hobson Metric Galvanised Flat Cut Stud Chemical Anchor, M10 to M24.