Ninja Maxim Cut 3 Gloves, Small (NIMAXIMC3GG000S)

The Ninja Maxim Cut 3 glove, listed by Ninja as the RAZR NFT BA2, is a light cut resistant glove with a form fitting composite liner and a black NFT (New Foam Technology) coat on the palm and knuckle. The liner is a plaited blend of HPPE, glass, nylon and spandex in green melange, and the coat covers the thumb crotch for longer glove life (manufacturer-stated). Ninja's data sheet says the coat gives grip in oily, dry and wet conditions and allows air to pass for breathability (manufacturer-stated).

Ninja gives EN 388:2016 4X31B, which is abrasion 4, blade cut not tested, tear 3 and puncture 1, with a cut result of B (manufacturer-stated). Cut level B is a low cut level. Ninja lists applications as automotive, materials handling and assembly, light fabrication and manufacturing, steel and mining, product inspection and horticulture (manufacturer-stated). The EN 388:2016 result (manufacturer-stated) is read in the order abrasion, blade cut, tear, puncture and then a cut letter from A to F. A higher number or letter is a higher level, a 0 means level 1 was not reached, and an X means that test was not done. A P at the end means the impact test was passed. Match the glove to your risk assessment, check the fit, and replace gloves that are worn, torn or contaminated. The ratings are test results on the glove material and do not describe every hazard on your site.

This listing carries small to 2X-large. Beaver packs the glove 12 pairs to a pack and 144 pairs to a carton (manufacturer-stated).

Where this product is used

• Automotive and materials handling (manufacturer-stated)
• Light fabrication and manufacturing (manufacturer-stated)
• Product inspection and assembly (manufacturer-stated)
• Horticulture (manufacturer-stated)

Features

• NFT coat for oily, dry and wet grip (manufacturer-stated)
• Plaited HPPE, glass, nylon and spandex liner (manufacturer-stated)
• Cut result B (EN 388:2016 4X31B) (manufacturer-stated)
• Reinforced thumb crotch (manufacturer-stated)
• Breathable coat (manufacturer-stated)

Common specifications

Key specifications

These manufacturer figures are from Ninja's RAZR NFT BA2 data sheet (NIMAXIMC3) and Beaver's PPE catalogue Vol 2.

Selecting the right option

Choose the Maxim Cut 3 for light cut risk where grip and feel matter. For a higher cut result see the RAZR NFT CA3 glove and RAZR Diamond 5 glove, and for an oily environment see the Maxim Cut 3 Oil glove.

Related products

Other Ninja cut resistant gloves: Maxim Cut 3 Oil glove, RAZR NFT CA3 glove, RAZR Diamond 5 glove and Premier Cut D gauntlet.