Ninja Cut D gloves, Small

The Ninja RAZR Diamond 5 glove has a liner made with Dyneema Diamond technology, nylon and spandex, and a soft PU coat on the palm and knuckle. The thin Dyneema Diamond fibre gives cut resistance without the discomfort of fibreglass, allows good feel and control, and radiates heat away from the hand. The glove is 26cm long (size large) with a smooth finish and a grey coat over a melange light green liner.

It has EN 388:2016 4X43D, which is abrasion 4, blade cut not tested, tear 4 and puncture 3, with a cut result of D. Applications include the steel industry and sheet metal fabrication, automotive, glass and paper handling, heavy metals handling, plastic, carpet and cardboard trimming and cutting, and machine shops. Cut resistant gloves reduce the risk from sharp edges and do not make a hand safe from blades, so avoid using them near moving machinery where a glove can be pulled in. The EN 388:2016 result is read in the order abrasion, blade cut, tear, puncture and then a cut letter from A to F. A higher number or letter is a higher level, a 0 means level 1 was not reached, and an X means that test was not done.

Where this product is used

• Steel industry and sheet metal fabrication
• Automotive and machine shops
• Glass and paper handling
• Plastic, carpet and cardboard trimming and cutting

Features

• Dyneema Diamond liner for cut resistance without fibreglass
• Soft PU coat on palm and knuckle
• 360 degree breathability
• Cut result D (EN 388:2016 4X43D)

Key specifications

Choosing the right option

Choose the Diamond 5 for cut risk in sheet metal, glass and trimming work. For a lighter cut level see the Maxim Cut 3 glove and RAZR NFT CA3 glove, and for a higher cut level see the Slash-Tec FA6 glove and Slash-Tec FA6 Impact glove.

Other Ninja cut resistant gloves: Maxim Cut 3 glove, RAZR NFT CA3 glove, Maxim Cut 3 Oil glove.