Ninja Maxim Cut 3 Oil Gloves, Small (NIMXOILC3BL000S)

The Ninja Maxim Cut 3 Oil glove, listed by Ninja as the RAZR NFT BA2-Oil, is a light cut resistant glove for oily work. It has a form fitting composite liner of HPPE, glass, nylon and spandex in royal blue melange, and a black over blueberry coat of NFT (New Foam Technology) over flat nitrile that runs over the knuckle (manufacturer-stated). Ninja's data sheet says the coat repels water and oil up to the knuckle area and gives grip in oily, dry and wet conditions (manufacturer-stated).

Ninja gives EN 388:2016 4331B, which is abrasion 4, blade cut not tested, tear 3 and puncture 3, with a cut result of B (manufacturer-stated). Cut level B is a low cut level. Ninja lists applications as automotive, light metal processes and metalworking, manufacturing, packaging and handling, mining, infrastructure and agriculture (manufacturer-stated). The EN 388:2016 result (manufacturer-stated) is read in the order abrasion, blade cut, tear, puncture and then a cut letter from A to F. A higher number or letter is a higher level, a 0 means level 1 was not reached, and an X means that test was not done. A P at the end means the impact test was passed. Match the glove to your risk assessment, check the fit, and replace gloves that are worn, torn or contaminated. The ratings are test results on the glove material and do not describe every hazard on your site.

This listing carries small to X-large. Ninja's data sheet lists small to 3X-large. Beaver packs the glove 12 pairs to a pack and 144 pairs to a carton (manufacturer-stated).

Where this product is used

• Automotive and light metalworking (manufacturer-stated)
• Manufacturing, packaging and handling (manufacturer-stated)
• Mining, infrastructure and agriculture (manufacturer-stated)

Features

• NFT over nitrile coat repels oil and water up to the knuckle (manufacturer-stated)
• Composite HPPE, glass, nylon and spandex liner (manufacturer-stated)
• Cut result B (EN 388:2016 4331B) (manufacturer-stated)
• Form fitting liner (manufacturer-stated)

Common specifications

Key specifications

These manufacturer figures are from Ninja's RAZR NFT BA2-Oil data sheet (NIMXOILC3) and Beaver's PPE catalogue Vol 2.

Selecting the right option

Choose the Maxim Cut 3 Oil where parts are oily and the cut risk is light. For dry or lightly oily parts see the Maxim Cut 3 glove.

Related products

Other Ninja cut resistant gloves: Maxim Cut 3 glove, RAZR NFT CA3 glove, RAZR Diamond 5 glove and Premier Cut D gauntlet.