Pferd 26007216 Oval Shape Burr TRE 12,7x22,2x6,35 MX NCC, 12.7 x 22.22 mm

This page lists 3 Pferd oval burrs: shank-mounted tungsten carbide burrs with the MX NCC cut, all on a 6.35 mm shank. Head sizes (diameter x cut length) run from 3/8 x 5/8 to 5/8 x 1 in.

The PFERD Australia page lists these items under NEW COMBI CUT, MX NCC. It gives item numbers and dimensions only, with no material ratings or speeds, so contact us if you need those details.

Where this product is used

• Deburring, chamfering and machining contours with a shank-mounted burr (manufacturer-stated)
• Material rating for the MX NCC cut not published by the manufacturer
• Deburring, chamfering, milling out for build-up welding preparation, machining weld seams and machining contours, and cleaning cast material (manufacturer-stated)

Features

• Head sizes (diameter x cut length): 3/8 x 5/8 to 5/8 x 1 in
• 6.35 mm shank (manufacturer-stated)
• NEW COMBI CUT, MX NCC (manufacturer-stated)

Common specifications

Key specifications

Each item number is one head size; the cut and shank are shown above and in the table.

Selecting the right option

Match the shank to your tool: this page lists a 6.35 mm shank. Choose the head size for the feature you are cutting; the table shows the cut length and overall length of each item. Never exceed the maximum permitted rotational speed, wear eye protection, hearing protection and a dust mask, and observe the recommended rotational speed, especially with long shanks (manufacturer-stated).

Related products

Related burrs: Pferd Oval Shape Burr TRE, MX NCC Cut, 10 x 16 to 16 x 25 mm, 6 mm Shank, Pferd Oval Shape Burr TRE, Cut 3 PLUS, 1/4 x 3/8 to 1/2 x 7/8 in, 6.35 mm Shank and Pferd Oval Shape Burr TRE 1016/6,35 TOUGH, 6.35 mm Shank (21722260).