Pferd 21125286 Conical Radius End Burr KEL, ALU, 12 x 30 mm, 6 mm Shank

This Pferd conical burr with radius end (KEL) is a tungsten carbide burr in ALU cut on a 6 mm shank (manufacturer-stated). This page lists 1 item, head size 12 x 30 mm (manufacturer-stated).

The PFERD catalogue describes the ALU cut as giving a high stock removal rate on aluminium and aluminium alloys, non-ferrous metals and plastics, with smooth milling (manufacturer-stated).

The PFERD catalogue describes the KEL as a conical burr with round radius end according to DIN 8032 for high stock removal, long tool life and smooth operation when machining aluminium (manufacturer-stated).

Features listed: large chips and reduced material adhesion; smooth milling on aluminium and aluminium alloys (manufacturer-stated).

Where this product is used

• Machining aluminium and aluminium alloys (manufacturer-stated)
• Non-ferrous metals and plastics (manufacturer-stated)

Features

• Tungsten carbide, conical shape with radius end (KEL) (manufacturer-stated)
• ALU: high stock removal rate on aluminium, with smooth milling (manufacturer-stated)
• 6 mm shank (manufacturer-stated)
• Head size 12 x 30 mm, overall length 70 mm (manufacturer-stated)
• Large chips and reduced material adhesion (manufacturer-stated)
• Smooth milling on aluminium and aluminium alloys (manufacturer-stated)

Key specifications

Selecting the right option

Check the head size and shank against the job and your tool. The catalogue gives a cutting speed of 600 to 1,100 m/min for aluminium alloys, and the rotational speed follows from the burr diameter (manufacturer-stated). Do not exceed the maximum permitted rotational speed, observe the recommended rotational speed (especially with long shanks), wear eye and hearing protection and a dust mask, and do not use a damaged burr or use the burr for cutting (manufacturer-stated).

Related products

Same shape and cut in other sizes or shanks: Pferd Conical Radius End Burr KEL, ALU, 12.7 x 28.6 mm, 6.35 mm Shank (21725165). Same shape with other cuts: Pferd Conical Radius End Burr KEL, NON-FERROUS, 10 x 20 and 12 x 30 mm, 6 mm Shank and Pferd Conical Radius End Burr KEL, Cut 3 PLUS, 10 x 20 to 16 x 30 mm, 6 mm Shank. Same cut in other shapes: Pferd Tree Shape Burr RBF, ALU, 6 x 18 and 12 x 25 mm, 6 mm Shank.