Pferd 21728004 Flame Shape Burr B, ALLROUND, 12.7 x 31.7 mm, 6.35 mm Shank

This Pferd flame shape burr (B) is a tungsten carbide burr in ALLROUND cut on a 6.35 mm shank (1/4 in) (manufacturer-stated). This page lists 1 item, head size 12.7 x 31.7 mm (manufacturer-stated).

The PFERD catalogue describes the ALLROUND cut as giving a high stock removal rate on key materials such as steel, cast steel, stainless steel (INOX), non-ferrous metals and cast iron (manufacturer-stated).

The PFERD catalogue describes the B as a flame-shaped burr according to ISO 7755/8 for versatile, economical and time-saving use on steel and cast steel, stainless steel (INOX), non-ferrous metals and cast iron (manufacturer-stated).

Features listed: comfortable working thanks to reduced vibration and less noise; reduced wear on the tool drive from impact-free work without chatter marks, thanks to the high concentricity (manufacturer-stated).

Where this product is used

• Steel and cast steel, stainless steel (INOX), non-ferrous metals and cast iron (manufacturer-stated)
• Versatile, economical and time-saving use across these materials (manufacturer-stated)

Features

• Tungsten carbide, flame shape (B) (manufacturer-stated)
• ALLROUND: high stock removal rate on steel, cast steel, stainless steel (INOX), non-ferrous metals and cast iron (manufacturer-stated)
• 6.35 mm shank (1/4 in) (manufacturer-stated)
• Head size 12.7 x 31.7 mm, overall length 76.2 mm (manufacturer-stated)
• Comfortable working thanks to reduced vibration and less noise (manufacturer-stated)
• Reduced wear on the tool drive from impact-free work without chatter marks, thanks to the high concentricity (manufacturer-stated)

Key specifications

Selecting the right option

Check the head size and shank against the job and your tool. The catalogue gives a cutting speed of 450 to 750 m/min for steels up to 1,200 N/mm2, and the rotational speed follows from the burr diameter (manufacturer-stated). Do not exceed the maximum permitted rotational speed, observe the recommended rotational speed (especially with long shanks), wear eye and hearing protection and a dust mask, and do not use a damaged burr or use the burr for cutting (manufacturer-stated).

Related products

Same shape and cut in other sizes or shanks: Pferd Flame Shape Burr B, ALLROUND, 12 x 30 mm, 6 mm Shank. Same shape with other cuts: Pferd Flame Shape Burr B, Cut 3 PLUS, 7.9 x 19 and 12.7 x 31.7 mm, 6.35 mm Shank and Pferd Flame Shape Burr B, MX NCC, 6.35 mm Shank (26006771). Same cut in other shapes: Pferd Conical Radius End Burr KEL, ALLROUND, 1/4 x 5/8 and 3/8 x 1 3/16 in, 6.35 mm (1/4 in) Shank and Pferd Conical Pointed Burr SKM, ALLROUND, 6.35 x 25.4 and 12.7 x 25.4 mm, 6.35 mm Shank.